暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver metal rack enclosure holding three 3.5-inch drive bays in two 5.25-inch slots

ICY DOCK

ICY DOCK flexiDOCK MB830SP-B 3×3.5″ SATA/SAS Rack Server

SKU CH-ASEF-38QN9

Holds three 3.5-inch SATA or SAS drives in two 5.25-inch bays with tool-less hot-swap trays and full 6 Gb/s speed

  • TypeRack
  • Fits three 3.5-inch drives in two 5.25-inch bays
  • Full SATA III 6 Gb/s transfer speed supported
  • SAS single-channel operation with compatible host
  • Tool-less and screw-less drive installation
  • Three-year manufacturer warranty included

Three-drive density in two bays

The ICY DOCK flexiDOCK MB830SP-B fits three 3.5-inch SATA or SAS hard drives into a pair of 5.25-inch front bays. It is built for servers and workstations that need high capacity without sacrificing external accessibility. The tray-less mechanism lets technicians swap drives in seconds.

Full-speed SATA III with SAS option

Each bay delivers the full 6 Gb/s SATA III bandwidth so mechanical drives never hit a controller bottleneck. A SAS host connection enables single-channel SAS operation for environments that require that protocol. Installation is completely tool-less and requires no screws.

Steady throughput under continuous duty

The open-frame design lets chassis airflow pass directly over all three drives during sustained read or write workloads. No enclosure walls trap heat, so drive temperatures track the case ambient level. The unit is rated for constant operation in rack deployments.

特長

  • Fits three 3.5-inch drives in two 5.25-inch bays
  • Full SATA III 6 Gb/s transfer speed supported
  • SAS single-channel operation with compatible host
  • Tool-less and screw-less drive installation
  • Three-year manufacturer warranty included

仕様

TypeRack

この商品に関する質問

How do I install a 3.5-inch drive into the flexiDOCK MB830SP-B without screws?

Slide the drive straight into an empty bay until the connector seats; the tray-less latch locks it automatically. The step people miss is pushing until they feel a firm click, not just a light touch.

What part of the flexiDOCK MB830SP-B will need replacement after heavy use?

The SATA cables included with the unit are the only wear items; swap them if transfer errors appear after many insertion cycles.

What speed limit appears first when three drives run sustained transfers on the flexiDOCK MB830SP-B?

Each bay caps at 6 Gb/s SATA III, so the per-drive interface is the first bottleneck before any backplane or cabling limit is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。