暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SATA SSD with 7mm profile

Intel

Intel D3 S4520 1.92TB SATA 2.5" 7.0mm internal SSD

SKU CH-TFT8-XM357

1.92 TB SATA solid-state drive in a 2.5 inch 7.0 mm form factor for internal storage

  • 92 TB capacity stores large datasets
  • SATA 6 Gb/s interface enables broad compatibility
  • 5 inch 7.0 mm form factor fits standard bays
  • 3D TLC NAND balances endurance and cost
  • D3 S4520 series targets read-intensive workloads

Intel D3 S4520 1.92TB SATA SSD

The Intel D3 S4520 is a 1.92TB internal solid-state drive using a SATA 6Gb/s interface and 3D TLC NAND. It fits a standard 2.5 inch bay with a 7.0mm height. This drive serves read-intensive workloads in servers and storage arrays.

2.5 inch SATA drive for read-heavy loads

This drive suits administrators upgrading SATA-based platforms that require high capacity and consistent read performance. Builders whose systems only accept PCIe or M.2 form factors cannot install this model. Buyers needing higher write endurance should evaluate drives specified for mixed-use or write-intensive tiers.

SATA 6Gb/s interface and 1.92TB capacity

The single specification that decides fit is the SATA 6Gb/s interface combined with the 1.92TB capacity in a 2.5 inch 7.0mm form factor. The host must provide a compatible SATA port and physical bay. Capacity and interface together determine whether this drive matches the storage requirement.

特長

  • 92 TB capacity stores large datasets
  • SATA 6 Gb/s interface enables broad compatibility
  • 5 inch 7.0 mm form factor fits standard bays
  • 3D TLC NAND balances endurance and cost
  • D3 S4520 series targets read-intensive workloads

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much power does the 1.92TB SATA drive draw during all-day operation?

The Intel D3 S4520 1.92TB SATA 2.5" 7.0mm internal SSD consumes minimal power typical of SATA SSDs, generating little heat and operating silently with no moving parts during continuous use.

What connection does my system need for the Intel SSDSC2KB019TZ01 to work?

Your motherboard or host adapter must provide a standard SATA 6Gb/s data port and a SATA power connector; the 2.5" 7.0mm form factor fits any 2.5" drive bay or caddy.

Will the D3 S4520 1.92TB SSD work alongside my older SATA hard drives?

Yes, it connects to the same SATA interface as legacy hard drives, so the system sees it as another SATA device and you can mix it with older drives on the same controller.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。