暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Intel

Intel D3-S4610 1.92 TB SATA 2.5" 7 mm enterprise SSD

SKU CH-10F5-Z4JHT

A 1.92 TB SATA enterprise SSD with 560 MB/s read, 510 MB/s write, 97,000 random read IOPS and 46,500 random write IOPS in a 2.5" 7.0 mm form factor

  • Low latency with 36 us read and 37 us write
  • High random reads at 97,000 IOPS
  • Strong random writes at 46,500 IOPS
  • Fast sequential speeds up to 560 MB/s read and 510 MB/s write
  • Efficient power use with 3.0 W active and 1.0 W idle

1.92 TB SATA enterprise SSD

This Intel D3-S4610 drive provides 1.92 TB of capacity in a 2.5-inch 7.0 mm form factor. It uses 3D NAND TLC flash and connects via a SATA 6 Gb/s interface. The drive targets read-intensive server and storage array workloads.

Sustained random IOPS and latency

Random read performance reaches 97,000 IOPS while random write delivers 46,500 IOPS across the full span. Average latency sits at 36 µs for reads and 37 µs for writes. Active power draw is 3.0 W with an idle figure of 1.0 W.

SATA 6 Gb/s interface limits

Sequential throughput peaks at 560 MB/s read and 510 MB/s write, bounded by the SATA link. The drive fits servers and arrays that accept 2.5-inch 7 mm SATA devices. MTBF is rated at 2 million hours.

特長

  • Low latency with 36 us read and 37 us write
  • High random reads at 97,000 IOPS
  • Strong random writes at 46,500 IOPS
  • Fast sequential speeds up to 560 MB/s read and 510 MB/s write
  • Efficient power use with 3.0 W active and 1.0 W idle

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

How much power does the Intel D3-S4610 draw when running continuously at 3.0 W active and 1.0 W idle?

Active power is 3.0 W and idle power is 1.0 W, so a full-day workload stays within that envelope with 36 µs read and 37 µs write latency.

What physical slot and cable does this 2.5 inch 7.0 mm SATA drive require?

It fits any 2.5 inch 7.0 mm SATA bay and connects with a standard SATA data and power cable.

Will the 1.92 TB TLC SATA drive work in a legacy RAID controller that only supports SATA 3 Gb/s?

The drive uses SATA 6 Gb/s but negotiates down to 3 Gb/s, delivering up to 560 MB/s sequential read and 510 MB/s sequential write at the lower link speed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。