Intel
Intel D3-S4610 1.92 TB SATA 2.5" 7 mm enterprise SSD
A 1.92 TB SATA enterprise SSD with 560 MB/s read, 510 MB/s write, 97,000 random read IOPS and 46,500 random write IOPS in a 2.5" 7.0 mm form factor
- Low latency with 36 us read and 37 us write
- High random reads at 97,000 IOPS
- Strong random writes at 46,500 IOPS
- Fast sequential speeds up to 560 MB/s read and 510 MB/s write
- Efficient power use with 3.0 W active and 1.0 W idle
1.92 TB SATA enterprise SSD
This Intel D3-S4610 drive provides 1.92 TB of capacity in a 2.5-inch 7.0 mm form factor. It uses 3D NAND TLC flash and connects via a SATA 6 Gb/s interface. The drive targets read-intensive server and storage array workloads.
Sustained random IOPS and latency
Random read performance reaches 97,000 IOPS while random write delivers 46,500 IOPS across the full span. Average latency sits at 36 µs for reads and 37 µs for writes. Active power draw is 3.0 W with an idle figure of 1.0 W.
SATA 6 Gb/s interface limits
Sequential throughput peaks at 560 MB/s read and 510 MB/s write, bounded by the SATA link. The drive fits servers and arrays that accept 2.5-inch 7 mm SATA devices. MTBF is rated at 2 million hours.
Pontos fortes
- Low latency with 36 us read and 37 us write
- High random reads at 97,000 IOPS
- Strong random writes at 46,500 IOPS
- Fast sequential speeds up to 560 MB/s read and 510 MB/s write
- Efficient power use with 3.0 W active and 1.0 W idle
Especificações
Ainda não há especificações publicadas para este artigo.
Perguntas sobre este artigo
How much power does the Intel D3-S4610 draw when running continuously at 3.0 W active and 1.0 W idle?
Active power is 3.0 W and idle power is 1.0 W, so a full-day workload stays within that envelope with 36 µs read and 37 µs write latency.
What physical slot and cable does this 2.5 inch 7.0 mm SATA drive require?
It fits any 2.5 inch 7.0 mm SATA bay and connects with a standard SATA data and power cable.
Will the 1.92 TB TLC SATA drive work in a legacy RAID controller that only supports SATA 3 Gb/s?
The drive uses SATA 6 Gb/s but negotiates down to 3 Gb/s, delivering up to 560 MB/s sequential read and 510 MB/s sequential write at the lower link speed.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
