暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Intel DC P4510 1TB 2.5 inch NVMe SSD in silver metal casing

Intel

Intel DC P4510 1TB 2.5" TLC PCI-e 3.1 x4 NVMe internal SSD

SKU CH-F7DB-4XDQ1

A 2.5-inch NVMe drive with up to 2850 MBps read and 1100 MBps write for mixed workloads

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity1TB
  • Memory ComponentsTLC
  • InterfacePCI-Express 3.1 x4
  • Max Sequential ReadUp to 2850Mbps
  • Up to 2850 MB/s sequential read for fast data access
  • Up to 1100 MB/s sequential write speeds up content creation
  • 460,000 IOPS random read handles heavy workloads
  • 70,000 IOPS random write supports transaction processing
  • 2,000,000 hours MTBF ensures long-term reliability

Data-Center NVMe SSD

The Intel DC P4510 is a 1 TB internal solid-state drive built for enterprise servers and storage arrays. It uses a 2.5 inch form factor with a PCIe 3.1 x4 NVMe interface and triple-level-cell memory. The drive delivers sequential reads up to 2850 MBps and writes up to 1100 MBps.

Read-Intensive Workloads

This SSD suits read-heavy applications such as email, business processing, transaction processing, decision support, SAN and NAS deployments. Its random read rating reaches 460000 IOPS while random writes peak at 70000 IOPS. Workloads that demand sustained high write throughput should consider drives with higher write endurance.

12 Watt Power Envelope

Active power draw is rated at 12 W, a key figure for thermal planning in dense 2.5 inch bays. The 2000000 hour MTBF reflects the reliability target for always-on data-centre operation. Ensure the server backplane and cooling can accommodate this power level before installation.

特長

  • Up to 2850 MB/s sequential read for fast data access
  • Up to 1100 MB/s sequential write speeds up content creation
  • 460,000 IOPS random read handles heavy workloads
  • 70,000 IOPS random write supports transaction processing
  • 2,000,000 hours MTBF ensures long-term reliability

仕様

BrandIntel
Part NumberSSDPE2KX010T8
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity1TB
Memory ComponentsTLC
InterfacePCI-Express 3.1 x4
Max Sequential ReadUp to 2850Mbps
Max Sequential WriteUp to 1100 MBps
4KB Random ReadUp to 460,000 IOPS
4KB Random WriteUp to 70,000 IOPS
MTBF2,000,000 hours
Power Consumption (Active)12W

この商品に関する質問

What 2.5-inch drive bay and PCIe 3.1 x4 slot does the DC P4510 1TB need to fit and connect?

The drive uses a standard 2.5-inch form factor and a PCI-Express 3.1 x4 interface, so it requires a compatible 2.5-inch bay and a PCIe 3.1 x4 slot or U.2 backplane.

How is the SSDPE2KX010T8 installed, and which step is often missed?

Insert the drive into the 2.5-inch bay, connect the PCIe 3.1 x4 interface, then enable NVMe in the system BIOS so the OS can recognise the drive.

When will the TLC NAND on this 1TB drive likely need replacement based on its rated MTBF?

The drive carries a 2,000,000-hour MTBF rating; under typical enterprise workloads this translates to several years before a preventative swap is considered.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。