Intel
Intel DC P4510 1TB 2.5" TLC PCI-e 3.1 x4 NVMe internal SSD
A 2.5-inch NVMe drive with up to 2850 MBps read and 1100 MBps write for mixed workloads
- Device TypeInternal Solid State Drive (SSD)
- Form Factor2.5"
- Capacity1TB
- Memory ComponentsTLC
- InterfacePCI-Express 3.1 x4
- Max Sequential ReadUp to 2850Mbps
- Up to 2850 MB/s sequential read for fast data access
- Up to 1100 MB/s sequential write speeds up content creation
- 460,000 IOPS random read handles heavy workloads
- 70,000 IOPS random write supports transaction processing
- 2,000,000 hours MTBF ensures long-term reliability
Data-Center NVMe SSD
The Intel DC P4510 is a 1 TB internal solid-state drive built for enterprise servers and storage arrays. It uses a 2.5 inch form factor with a PCIe 3.1 x4 NVMe interface and triple-level-cell memory. The drive delivers sequential reads up to 2850 MBps and writes up to 1100 MBps.
Read-Intensive Workloads
This SSD suits read-heavy applications such as email, business processing, transaction processing, decision support, SAN and NAS deployments. Its random read rating reaches 460000 IOPS while random writes peak at 70000 IOPS. Workloads that demand sustained high write throughput should consider drives with higher write endurance.
12 Watt Power Envelope
Active power draw is rated at 12 W, a key figure for thermal planning in dense 2.5 inch bays. The 2000000 hour MTBF reflects the reliability target for always-on data-centre operation. Ensure the server backplane and cooling can accommodate this power level before installation.
Pontos fortes
- Up to 2850 MB/s sequential read for fast data access
- Up to 1100 MB/s sequential write speeds up content creation
- 460,000 IOPS random read handles heavy workloads
- 70,000 IOPS random write supports transaction processing
- 2,000,000 hours MTBF ensures long-term reliability
Especificações
| Brand | Intel |
|---|---|
| Part Number | SSDPE2KX010T8 |
| Device Type | Internal Solid State Drive (SSD) |
| Form Factor | 2.5" |
| Capacity | 1TB |
| Memory Components | TLC |
| Interface | PCI-Express 3.1 x4 |
| Max Sequential Read | Up to 2850Mbps |
| Max Sequential Write | Up to 1100 MBps |
| 4KB Random Read | Up to 460,000 IOPS |
| 4KB Random Write | Up to 70,000 IOPS |
| MTBF | 2,000,000 hours |
| Power Consumption (Active) | 12W |
Perguntas sobre este artigo
What 2.5-inch drive bay and PCIe 3.1 x4 slot does the DC P4510 1TB need to fit and connect?
The drive uses a standard 2.5-inch form factor and a PCI-Express 3.1 x4 interface, so it requires a compatible 2.5-inch bay and a PCIe 3.1 x4 slot or U.2 backplane.
How is the SSDPE2KX010T8 installed, and which step is often missed?
Insert the drive into the 2.5-inch bay, connect the PCIe 3.1 x4 interface, then enable NVMe in the system BIOS so the OS can recognise the drive.
When will the TLC NAND on this 1TB drive likely need replacement based on its rated MTBF?
The drive carries a 2,000,000-hour MTBF rating; under typical enterprise workloads this translates to several years before a preventative swap is considered.
Também nesta secção
Os clientes também compararam
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
