暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 2.5 inch SATA SSD with green circuit board visible

Intel

Intel SSD DC S3710 200GB SATA 2.5in internal SSD

SKU CH-NS00-P40D2

A 200 GB SATA internal SSD built for data-centre workloads with MLC flash

  • Enterprise-grade endurance with MLC NAND technology
  • 200GB capacity for mixed read-write workloads
  • 6G SATA interface for broad server compatibility
  • 5-inch form factor fits standard drive bays
  • HP firmware validated for ProLiant integration

Intel SSD DC S3710 200GB SATA

This Intel SSD DC S3710 is a 200GB internal solid-state drive using a SATA interface in a 2.5in form factor. It employs MLC flash technology and carries HPE firmware HPG2 in a sealed package without a tray. The drive is identified by part numbers SSDSC2BA200G4P and 804638-001.

Suited for SATA 2.5in server bays

This drive suits administrators refreshing compatible HPE or Intel SATA 2.5in bays that require MLC endurance and vendor-specific firmware. Builders whose platforms demand a different interface, a larger capacity, or a supplied mounting tray should look elsewhere.

200GB capacity

The 200GB capacity is the key specification that determines fit for a given workload or replacement scenario. Verify that this exact capacity matches the array configuration or the slot requirement before purchase.

特長

  • Enterprise-grade endurance with MLC NAND technology
  • 200GB capacity for mixed read-write workloads
  • 6G SATA interface for broad server compatibility
  • 5-inch form factor fits standard drive bays
  • HP firmware validated for ProLiant integration

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What speed does the SATA 6G interface cap this drive at in practice?

The SATA 6G link tops out at 6 Gb/s, so sequential reads and writes cannot exceed that bandwidth ceiling.

What physical space and mounting does the 2.5in form factor require?

It fits a standard 2.5in drive bay and uses the usual SATA data and power connectors; no tray is included.

How is the drive installed and which step is often missed?

Connect the SATA data and power cables, secure the drive in the bay, then verify the system sees the HPG2 firmware before use.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。