JONSBO
JONSBO ZA-240BR 240mm case fan 2×120mm ARGB 28mm 700-2400rpm black
Dual 120 mm ARGB fans in a single 240 mm frame with infinity-mirror lighting, PWM speed control from 700 to 2400 rpm and noise of 21.3 to 37.3 dB(A)
- Fan Counts2 Fans
- TypeCase Fan
- CompatibilityCase
- Fan Size240mm
- Fan Thickness28mm
- RPM700-2400rpm(±10%)
- 4-sided infinity mirror illusion creates depth
- single 240 mm frame holds two 120 mm fans
- PWM speed range 700-2400 rpm for quiet or high airflow
- ARGB sync via 3-pin header supports 16 million colours
- 28 mm thick aluminium nameplate design fits standard 240 mm mounts
Single-frame 240 mm fan unit
The JONSBO ZA-240BR combines two 120 mm ARGB fans inside one 242 mm by 123 mm by 28 mm frame, so only a single PWM 4-pin and a single 3-pin ARGB header are required. The reversed-blade design and 4-sided infinity mirror panels create a layered lighting effect while keeping cable routing simple.
Builders who want unified speed and light control
This unit suits anyone who prefers one connection point for both fans and wants addressable RGB synchronised through the motherboard. It is less convenient for cases that only accept individual 120 mm mounts or for users who need independent speed curves per fan.
Steady airflow from 700 to 2400 rpm
Under sustained load the fans spin between 700 and 2400 rpm, delivering 0.49 to 2.46 mmH2O of static pressure while noise rises from 21.3 to 37.3 dB(A). The integrated male and female PWM headers keep the signal stable during long sessions.
特長
- 4-sided infinity mirror illusion creates depth
- single 240 mm frame holds two 120 mm fans
- PWM speed range 700-2400 rpm for quiet or high airflow
- ARGB sync via 3-pin header supports 16 million colours
- 28 mm thick aluminium nameplate design fits standard 240 mm mounts
仕様
| Brand | JONSBO |
|---|---|
| Model | ZA-240BR |
| Part Number | ZA-240BR |
| Fan Counts | 2 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 240mm |
| Fan Thickness | 28mm |
| RPM | 700-2400rpm(±10%) |
| Air Pressure | 0.49-2.46 mmH2O |
| Noise Level | 21.3-37.3 dB(A) |
| Power Connector | PWM 4PIN ARGB 3PIN |
| Color | Black |
| LED | ARGB |
| Features | JONSBO ZA-240 28MM ARGB Infinity Mirror Series Case Fan- 4-Sides Thousand- layer Mirror Illusion All-IN-One: Single Frame unit with 2x120 ARGB fans, No need to connect individual fans, Speed & Lighting Unified Regulation Easy Installation of the Joint Structure One Line Connection to Motherboard Aluminum CD Pattern Nameplate Addressable RGB sync- Insert 3PIN ARGB pins directly into the motherboard, synchronizing Over 16 million color effects Quiet/Low Noise PWN fan,PWM Integrated Male &Female head |
| Dimensions | 242mm(L)*123mm(W)*28mm(H) |
このモデルの他のバージョン
同シリーズにさらに 5点
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
この商品に関する質問
Do I need a motherboard with both a 4-pin PWM header and a 3-pin 5 V ARGB header to run the fan and lighting?
Yes, the unit draws power and speed control from a 4-pin PWM header and receives addressable RGB data through a standard 3-pin 5 V ARGB header on the motherboard.
Can the ZA-240BR share a PWM header with older 120 mm fans without losing speed control?
The frame already contains two 120 mm fans wired together; adding extra fans on the same header would exceed typical 1 A limits and is not recommended.
How do I confirm the infinity-mirror ARGB is syncing correctly after installation?
Connect the 3-pin ARGB plug to the motherboard, then use the board vendor's RGB software to cycle through effects — all 16 million colours should appear simultaneously on both fans.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics








