暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120mm case fans with infinity mirror centres and ARGB lighting, daisy-chained together

Jungle Leopard

Jungle Leopard Interstellar V2 RS 120mm Case Fan Infinity Mirror Module Daisy-Chain ARGB Triple Pack White

SKU CH-90AY-V8H81

Three 120 mm hydraulic-bearing fans with daisy-chain ARGB infinity-mirror lighting deliver 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White-Forward

  • Infinity mirror ARGB lighting with daisy-chain installation
  • Hydraulic bearing runs at 29 dBA for quiet cooling
  • 68 CFM airflow at 2.4 mmH₂O pressure
  • 120 mm PWM fans speed from 900 to 1850 RPM
  • Three fans included for 360 mm radiator support

Triple Pack 120mm Case Fans

This triple pack delivers three 120mm case fans with hydraulic bearings and ARGB lighting. Each unit spins between 900 and 1850RPM to move 68CFM of air at 2.4mmH2O static pressure. The fans connect via standard 4-pin PWM headers for motherboard speed control.

Builders Wanting Daisy-Chain ARGB

The slide-in interlocking design lets you chain all three fans on a single cable run, reducing internal clutter. Users who prefer traditional screw mounting or need fans thicker than 25mm should consider other models. The white frame suits light-themed builds but may clash with darker colour schemes.

Sustained Load Airflow Stability

At full 1850RPM the hydraulic bearing maintains consistent airflow without the resonance spikes seen in sleeve alternatives. Eight vibration pads keep operating noise at 29dBA even during prolonged gaming sessions. The bionic blade profile preserves static pressure across radiator fins for 360mm liquid-cooling loops.

特長

  • Infinity mirror ARGB lighting with daisy-chain installation
  • Hydraulic bearing runs at 29 dBA for quiet cooling
  • 68 CFM airflow at 2.4 mmH₂O pressure
  • 120 mm PWM fans speed from 900 to 1850 RPM
  • Three fans included for 360 mm radiator support

仕様

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2 RS
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
LEDARGB
Dimensions120×120×25mm 4.72*4.72*0.98in

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does my motherboard need a 4-pin PWM header to run these fans?

Yes, each fan uses a 4-pin power connector so your board must provide a matching 4-pin header for speed control.

Can I mix these 120 mm 68 CFM fans with older 120 mm fans on the same radiator?

Mixing fans with different airflow curves can create uneven pressure across a 360 mm radiator, so matching models is recommended for balanced cooling.

How do I confirm the ARGB daisy-chain is working after installation?

Connect the single lead to a 5 V ARGB header, set the motherboard software to a static colour, and verify all three infinity-mirror rings light identically.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。