暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three white 120mm case fans with infinity mirror centres and daisy-chain cables shown together in a triple pack

Jungle Leopard

Jungle Leopard Interstellar V2 120mm Reverse Blade Case Fan White Triple Pack

SKU CH-X3FW-YRPD5

Three white 120 mm reverse-blade fans with infinity-mirror lighting, daisy-chain wiring and hydraulic bearings deliver 68 CFM at under 32 dB(A)

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeHydraulic Bearing

Color White-Reverse

  • Quiet cooling with noise under 32 dB(A)
  • Strong airflow of 68 CFM per fan
  • Hydraulic bearing for long-life operation
  • Daisy-chain design cuts cable clutter
  • Infinity mirror ARGB lighting on each fan

Three-Pack ARGB Case Fans

The Jungle Leopard Interstellar V2 triple pack supplies three 120 mm case fans with reverse-blade geometry and infinity-mirror lighting. Each unit uses a hydraulic bearing and a 4-pin PWM connector for speed control between 900 and 1850 RPM. The bundle includes a controller so all three fans can be managed from a single header.

Daisy-Chain Installation Limits

A slide-in pin-to-pin interlock lets the fans connect in series, so only one cable runs from the cluster to the controller or motherboard. This reduces cable clutter but means every fan in the chain shares the same PWM signal and ARGB address. Builders who need independent speed curves or per-fan lighting zones cannot separate them without breaking the chain.

Hydraulic Bearing and Mounting Impact

Hydraulic bearings keep operating noise below 32 dB(A) while delivering 68 CFM airflow and 2.4 mmH₂O static pressure. Eight vibration-damping pads on the frame corners absorb resonance against the chassis or a 360 mm radiator. Nylon-mesh sleeving on the leads resists abrasion during routing, and the 25 mm thickness fits standard 120 mm mounting holes without clearance surprises.

特長

  • Quiet cooling with noise under 32 dB(A)
  • Strong airflow of 68 CFM per fan
  • Hydraulic bearing for long-life operation
  • Daisy-chain design cuts cable clutter
  • Infinity mirror ARGB lighting on each fan

仕様

BrandJungle Leopard
SeriesInterstellar
ModelInterstellar V2
Part NumberInterstellar V2
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeHydraulic Bearing
RPM900-1850RPM
Air Flow68CFM
Air Pressure2.4mmH20
Noise Level<32dB(A)
Power Connector4 Pin
ColorBlack
Dimensions120×120×25mm 4.72*4.72*0.98in

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I pick the three-fan pack or look for a single fan?

The triple pack contains three 120 mm fans and a controller, letting you fill a 360 mm radiator or three case mounts with one purchase.

What does 68 CFM actually deliver inside my build?

Each fan moves up to 68 CFM at 1850 RPM with 2.4 mmH₂O pressure, enough for a 360 mm AIO or high-airflow case cooling while staying below 32 dB(A).

How does the daisy-chain ARGB and PWM wiring work?

Fans interlock via slide-in pin-to-pin connectors so a single 4-pin PWM cable and one ARGB lead run the whole cluster, reducing cable clutter.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。