暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO ZWS30B 24V 1.3A 30W power supply

SKU CH-04HN-XWC4M

A 30 W ATX unit delivering 24 V at 1.3 A with 80 PLUS Gold efficiency, zero-RPM fan mode and LLC resonant DC-to-DC topology for silent, stable power

  • TypeATX
  • Faster wake-from-sleep with Modern Standby support
  • 80 PLUS Gold certification lowers power draw and heat
  • Fan stays off at low loads for silent running
  • Resonant LLC topology with DC-to-DC reduces coil whine
  • 24 V output delivers 30 W at 1.3 A

30 W 24 V ATX power supply

The KHACHIMO ZWS30B delivers 30 W of continuous power at 24 V with a 1.3 A output. It follows the ATX form factor and carries 80 PLUS Gold certification for high efficiency. Modern Standby compatibility enables extremely fast wake-from-sleep times and better low-load efficiency.

Ideal for low-power ATX systems needing quiet

This unit suits builds that prioritise silent running and efficient sleep states. Zero RPM fan mode stops the cooling fan at low and medium loads for near-silent operation. Resonant LLC topology with DC-to-DC conversion reduces coil whine and provides clean, consistent power. It is not intended for configurations that require higher total wattage.

24 V 1.3 A single-rail output

The power supply provides a single 24 V rail rated at 1.3 A, which determines whether it can meet the load of the connected components. Verify that the system’s total draw stays within this 30 W limit before installation.

特長

  • Faster wake-from-sleep with Modern Standby support
  • 80 PLUS Gold certification lowers power draw and heat
  • Fan stays off at low loads for silent running
  • Resonant LLC topology with DC-to-DC reduces coil whine
  • 24 V output delivers 30 W at 1.3 A

仕様

TypeATX

この商品に関する質問

How do I install the KHACHIMO ZWS30B into an ATX case and connect the 24-pin motherboard cable correctly?

Mount the unit in the standard ATX bay using four screws, then firmly seat the 24-pin main connector into the motherboard socket until the latch clicks; the step most often missed is forgetting to plug in the separate 4+4 pin CPU power cable nearby.

Which part of the ZWS30B will likely need replacement first after years of continuous operation?

The internal cooling fan is the primary wear item; its bearings degrade over time, and once the Zero RPM mode can no longer spin it up, temperatures rise and the unit should be swapped.

At what load does the 30W ZWS30B hit its thermal limit during sustained use?

Continuous output near the full 30W / 1.3A rating at 24V will trigger the protection circuit first, causing the supply to shut down until it cools.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。