我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Rectangular black metal ATX power supply unit with fan grille and cable bundle

KHACHIMO

KHACHIMO ZWS30B 24V 1.3A 30W power supply

SKU CH-04HN-XWC4M

A 30 W ATX unit delivering 24 V at 1.3 A with 80 PLUS Gold efficiency, zero-RPM fan mode and LLC resonant DC-to-DC topology for silent, stable power

  • TypeATX
  • Faster wake-from-sleep with Modern Standby support
  • 80 PLUS Gold certification lowers power draw and heat
  • Fan stays off at low loads for silent running
  • Resonant LLC topology with DC-to-DC reduces coil whine
  • 24 V output delivers 30 W at 1.3 A

30 W 24 V ATX power supply

The KHACHIMO ZWS30B delivers 30 W of continuous power at 24 V with a 1.3 A output. It follows the ATX form factor and carries 80 PLUS Gold certification for high efficiency. Modern Standby compatibility enables extremely fast wake-from-sleep times and better low-load efficiency.

Ideal for low-power ATX systems needing quiet

This unit suits builds that prioritise silent running and efficient sleep states. Zero RPM fan mode stops the cooling fan at low and medium loads for near-silent operation. Resonant LLC topology with DC-to-DC conversion reduces coil whine and provides clean, consistent power. It is not intended for configurations that require higher total wattage.

24 V 1.3 A single-rail output

The power supply provides a single 24 V rail rated at 1.3 A, which determines whether it can meet the load of the connected components. Verify that the system’s total draw stays within this 30 W limit before installation.

商品特色

  • Faster wake-from-sleep with Modern Standby support
  • 80 PLUS Gold certification lowers power draw and heat
  • Fan stays off at low loads for silent running
  • Resonant LLC topology with DC-to-DC reduces coil whine
  • 24 V output delivers 30 W at 1.3 A

商品規格

TypeATX

商品問答

How do I install the KHACHIMO ZWS30B into an ATX case and connect the 24-pin motherboard cable correctly?

Mount the unit in the standard ATX bay using four screws, then firmly seat the 24-pin main connector into the motherboard socket until the latch clicks; the step most often missed is forgetting to plug in the separate 4+4 pin CPU power cable nearby.

Which part of the ZWS30B will likely need replacement first after years of continuous operation?

The internal cooling fan is the primary wear item; its bearings degrade over time, and once the Zero RPM mode can no longer spin it up, temperatures rise and the unit should be swapped.

At what load does the 30W ZWS30B hit its thermal limit during sustained use?

Continuous output near the full 30W / 1.3A rating at 24V will trigger the protection circuit first, causing the supply to shut down until it cools.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。