暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Kingston Technology Corp.

Kingston Technology Corp. KSM26ES8/8HD 8GB DDR4 2666 CL19 ECC Unbuffered server RAM

SKU CH-YDR0-R5AM8 MPN KSM26ES8/8HD

8 GB DDR4 ECC unbuffered DIMM running at 2666 MHz with CL19 timing at 1.20 V

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Timing19-19-19
  • Voltage1.20V

Capacity 8GB

Rank 1Rx8

Option Hynix

  • ECC protection prevents data corruption for server reliability
  • 2666 MHz DDR4 speed delivers responsive system performance
  • 20 V operation reduces power draw and heat output
  • Unbuffered design lowers latency for direct memory access
  • 288-pin DIMM form factor fits standard server slots

Capacity and purpose

This 8 GB DDR4 module is built for entry-level servers and workstations that require error-correcting memory without registered buffering. The unbuffered design keeps latency low for single-socket boards that do not support registered DIMMs. It suits administrators who need basic ECC protection on a budget. Builders needing larger capacities or registered modules should look elsewhere.

Thermals noise and power

Operating at 1.20 V, the module draws minimal power and generates little heat under normal server workloads. Standard DDR4 cooling airflow in a rack chassis is sufficient; no additional heatsinks or active cooling are required. Silent operation is assured because the component has no moving parts. The low voltage also reduces strain on the memory controller during sustained loads.

Build and connectors

The 288-pin DIMM uses a single-rank 1Rx8 organisation with CL19 19-19-19 timings for straightforward installation in standard DDR4 slots. Gold-edge contacts resist oxidation in long-term deployments. The unbuffered layout means the module plugs directly into consumer-style server boards without registered-buffer support. Systems requiring registered or load-reduced DIMMs cannot use this part.

特長

  • ECC protection prevents data corruption for server reliability
  • 2666 MHz DDR4 speed delivers responsive system performance
  • 20 V operation reduces power draw and heat output
  • Unbuffered design lowers latency for direct memory access
  • 288-pin DIMM form factor fits standard server slots

仕様

BrandKingston
SeriesPremier Series
ModelKSM26ES8/8HD
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Timing19-19-19
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
配送重量0.09 kg
梱包サイズ152 × 76 × 5 mm

このモデルの他のバージョン

同シリーズにさらに 4点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install this 288-pin DDR4 DIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click into place, and ensure the motherboard is powered off and unplugged first.

What maintenance or replacement will this 8GB ECC module need over time?

No routine maintenance is required; keep the contacts clean and replace the module only if memory errors appear or a larger capacity is needed.

What limit appears first when this CL19 2666 MHz kit runs under sustained load?

The CL19 latency at 2666 MHz sets the throughput ceiling; sustained heavy workloads will hit that timing bound before voltage or thermal limits.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。