暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connector and black memory chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KVR400/1GR 1GB DDR 400 (PC 3200) desktop RAM

SKU CH-5AN9-JBF4P MPN KVR400/1GR

1GB DDR 400 desktop memory with CL3 latency and 2.60V operation for PC 3200 systems

  • Capacity1GB
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Voltage2.60V
  • Heat SpreaderNo
  • 1GB capacity for basic desktop tasks
  • DDR 400 speed rated at PC 3200
  • CAS latency CL3 for standard timing
  • 60V operation within JEDEC spec
  • 100% tested through Advanced Validation Labs

Kingston ValueRAM 1GB DDR 400

This Kingston ValueRAM module provides 1GB of DDR 400 (PC 3200) desktop memory. It operates at CL3 latency with a 2.60V voltage and has no heat spreader. The module is 100% tested and complies with JEDEC specifications.

Suitable for legacy DDR systems

This memory suits builders repairing or upgrading older desktops that require DDR 400 modules. Systems needing higher capacity, lower voltage, or modern DDR generations cannot use this part.

DDR 400 (PC 3200) speed rating

The DDR 400 (PC 3200) speed rating is the single specification that determines compatibility. Your motherboard must support this exact speed and voltage for the module to function correctly.

特長

  • 1GB capacity for basic desktop tasks
  • DDR 400 speed rated at PC 3200
  • CAS latency CL3 for standard timing
  • 60V operation within JEDEC spec
  • 100% tested through Advanced Validation Labs

仕様

BrandKingston
SeriesValueRAM
ModelKVR400/1GR
Capacity1GB
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Voltage2.60V
Heat SpreaderNo
配送重量0.09 kg
梱包サイズ196 × 145 × 23 mm

この商品に関する質問

Will this 184-pin DIMM fit my DDR 400 desktop motherboard?

The module is a standard 184-pin DDR DIMM keyed for DDR 400 (PC 3200) slots. It requires a motherboard that accepts 2.60 V DDR memory and supports CL3 timing.

What is the correct way to seat this KVR400/1GR module, and which step do builders often miss?

Align the notch with the slot key, press straight down until both side clips snap shut, then verify the module sits flush. The missed step is checking that both clips are fully locked.

Does this ValueRAM stick need any firmware updates or thermal paste replacement over its life?

No firmware or thermal paste is involved. The module has no heat spreader and runs at the JEDEC 2.60 V spec. If errors appear later, reseat the DIMM or test with a memory diagnostic tool.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。