暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold edge connectors and black memory chips

Kingston Technology Corp.

Kingston Technology Corp. KVR400/512R desktop RAM 512MB DDR 400 (PC 3200) 184-Pin CL3 2.6V

SKU CH-EQSS-M7991 MPN KVR400/512R

512 MB DDR 400 desktop memory running at CL3 on 2.6 V with a 184-pin DIMM

  • Capacity512MB
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Voltage2.60V
  • ECCNo
  • 512 MB capacity supports everyday desktop tasks
  • DDR 400 speed rated at PC 3200 bandwidth
  • CAS latency 3 delivers responsive memory timing
  • 6 V operation matches standard DDR voltage
  • 184-pin DIMM fits compatible desktop motherboards

Product Identity

Kingston ValueRAM KVR400/512R is a 512MB 184-pin DDR SDRAM module rated for DDR 400 (PC 3200) with a CAS latency of 3 and a voltage of 2.6V. It is designed for desktop systems that accept this memory standard.

Suitability

This module suits owners of older desktops needing a direct replacement or a capacity increase within the DDR 400 specification. Builders who require ECC error correction, larger individual module capacities, or a different pin count should look elsewhere.

Deciding Specification

The 184-pin DDR interface combined with the 2.6V operating voltage determines whether this module fits the motherboard slots and meets the electrical requirements of the target system.

特長

  • 512 MB capacity supports everyday desktop tasks
  • DDR 400 speed rated at PC 3200 bandwidth
  • CAS latency 3 delivers responsive memory timing
  • 6 V operation matches standard DDR voltage
  • 184-pin DIMM fits compatible desktop motherboards

仕様

Capacity512MB
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Voltage2.60V
ECCNo

この商品に関する質問

Does my motherboard need an 184-pin DDR DIMM slot to use this 512MB module?

Yes, the stick is a 184-pin DDR SDRAM DIMM, so the board must provide a matching DDR 400 (PC 3200) slot that can supply 2.6 V.

Will this CL3 2.6 V stick run stably in a system that still uses slower DDR 266 or DDR 333 modules?

The motherboard will clock all installed memory to the lowest common speed and tightest shared timings; mixing with slower DDR modules forces this kit to run at their lower rate.

How can I confirm the module is recognised at its rated DDR 400 CL3 setting after installation?

Enter the BIOS or use a system-information utility and verify the memory shows 512 MB at 400 MHz (PC 3200) with CAS latency 3 and 2.6 V.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。