暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black braided cable with M.2 male plug on left and straight U.2 female port, 50cm length

LetLinkSo

LetLinkSo PCIe 4.0 M.2 to U.2 Adapter Left Exit 50cm

SKU CH-M2ZR-D8200

Connects a U.2 NVMe SSD to an M.2 2280 slot with PCIe 4.0 speeds up to 64 Gbps, left exit design, 50cm cable and 15-pin SATA power connector

  • ColorBlack
  • Cable Length1.6ft (50cm)
  • SpecificationsPCIe 4.0 M.2 to U.2 Adapter Left Exit
  • Connector AMale M.2 M key 2280
  • Connector BStraight Female SFF-8639(U.2)
  • Terminal GenderMale to Male

Cable Exit Direction Left Exit

  • Add U.2 NVMe storage via M.2 2280 slot
  • PCIe 4.0 supports 64 Gbps theoretical speed
  • Works with PCIe 3.0, 2.0, 1.0 devices
  • 50 cm braided cable with left-exit design
  • 15-pin SATA power required for operation

M.2 to U.2 NVMe adapter

This PCIe 4.0 adapter connects a U.2 NVMe SSD to an M.2 2280 M key slot on a motherboard or add-in card. It targets builders who want enterprise or high-capacity U.2 drives in a desktop or workstation without a native U.2 port. The 50cm braided cable uses a left-exit M.2 connector for cleaner routing in tight chassis.

Check motherboard slot and power

Verify the board has a free M.2 2280 M key slot wired for PCIe 4.0 or earlier generations. The adapter draws drive power from a standard 15-pin SATA power connector, so a spare lead from the power supply is required. No drivers or software are needed for operation.

Upgrades from M.2-only storage

The adapter lets you move from consumer M.2 drives to U.2 SSDs that often offer higher endurance and sustained write performance. The jump is worthwhile when workloads demand the 64 Gbps PCIe 4.0 ceiling and the physical U.2 form factor fits the build. It does not suit systems lacking an M.2 M key slot or a SATA power lead.

特長

  • Add U.2 NVMe storage via M.2 2280 slot
  • PCIe 4.0 supports 64 Gbps theoretical speed
  • Works with PCIe 3.0, 2.0, 1.0 devices
  • 50 cm braided cable with left-exit design
  • 15-pin SATA power required for operation

仕様

BrandLetLinkSo
SeriesPCIe 4.0 M.2 to U.2 Adapter
ModelB0DJ8K1VZG
Part NumberB0DJ8K1VZG
ColorBlack
Cable Length1.6ft (50cm)
SpecificationsPCIe 4.0 M.2 to U.2 Adapter Left Exit
Connector AMale M.2 M key 2280
Connector BStraight Female SFF-8639(U.2)
Terminal GenderMale to Male
Cable Jakcet TypeBraided
Connector StyleM.2 to SFF-8639 U.2
FeaturesENHANCED SYSTEM PERFORMANCE
Weight1.68 ounces
Package Quantity1
Package ContentsPCIe 4.0 M.2 to U.2 Adapter Left Exit x 1

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What does the box contain and is a separate power cable needed?

The package includes one PCIe 4.0 M.2 to U.2 adapter with a 50cm braided cable. A SATA power cable must be connected to the adapter for it to function.

Which PCIe generation should I select for my U.2 NVMe SSD?

The adapter runs at PCIe 4.0 speeds up to 64 Gbps and remains compatible with PCIe 3.0, 2.0 and 1.0 drives, so choose the version that matches your SSD and motherboard capabilities.

What does the 64 Gbps headline figure mean once the adapter is installed in my system?

It is the theoretical maximum bandwidth of the PCIe 4.0 x4 link between the M.2 2280 slot and the U.2 NVMe SSD; actual throughput depends on the specific drive and motherboard implementation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。