暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black rectangular wall-wart power adapter with fixed AC prongs and a thin DC cable ending in a 2.1 mm barrel plug

Line6

Line6 DC-1g 9V DC 500mA Power Supply 2.1mm Center Pin

SKU CH-NF1N-XX2CJ

9 V DC 500 mA power supply with 2.1 mm centre pin for XDS-Plus, XDR95, Relay G30, G50, G90, XD-V70, XD-V30 and M5 Stompbox Modeler

  • TypeAT
  • 9 V DC output powers compatible Line 6 gear reliably
  • 500 mA current rating meets the draw of listed pedals and receivers
  • 1 mm centre-positive barrel fits the specified X2, Relay and Stompbox models
  • AT-type construction delivers stable regulated power for stage and studio use

Compatible Line 6 Devices

This 9V DC power supply delivers 500mA through a 2.1mm centre-positive plug. It is designed for the XDS-Plus, XDR95, Relay G30, G50, G90, XD-V70, XD-V30 and M5 Stompbox Modeler units. Musicians using any of these pedal receivers or modelers can replace a lost or damaged adapter with this unit.

Simple Plug-In Installation

Connect the barrel connector to the device power jack and the mains plug to a wall socket; no tools or configuration are required. The most common issue is accidentally using a centre-negative or higher-voltage adapter, which can damage the pedal. Verify the 2.1mm centre-pin polarity before powering the unit.

特長

  • 9 V DC output powers compatible Line 6 gear reliably
  • 500 mA current rating meets the draw of listed pedals and receivers
  • 1 mm centre-positive barrel fits the specified X2, Relay and Stompbox models
  • AT-type construction delivers stable regulated power for stage and studio use

仕様

TypeAT

この商品に関する質問

How can I confirm the power supply is delivering the correct 9V DC 500mA output after connecting it?

The unit powers compatible Line 6 devices such as the Relay G30, G50, G90, XD-V70, XD-V30, M5 Stompbox Modeler, XDS-Plus and XDR95. If the connected device turns on and operates normally, the supply is working as intended.

What comes in the box and do I need any extra cables or adapters?

The package includes the DC-1g power supply with a fixed 2.1 mm centre-pin plug. No additional cables or adapters are required for the listed X2, Relay, XD-V and M5 units.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。