暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Grey silicone thermal pad 85 by 45 by 0.5 mm

Lirealar

Lirealar 85x45mm thermal pad 12.8 W/mK 15g

SKU CH-94TJ-8N0WX MPN 85x45mm

A 15 g silicone thermal pad measuring 85×45 mm with 12.8 W/mK conductivity, non-conductive insulation, and a -40 °C to 200 °C operating range for GPU, CPU, or laptop heatsinks

  • Volume / Net Weight15g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 85x45mm

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

Specification 0.5mm

他に 1点の構成を表示
  • Efficient heat transfer with 12.8 W/mK conductivity
  • Safe non-conductive insulation exceeding 9.8 kV breakdown voltage
  • Flexible gap-filling pad compresses to 0.5 mm thickness
  • Wide operating range from -40 °C to 200 °C
  • Reusable non-curing silicone stays effective over time

12.8 W/mK thermal pad for precise gap filling

This 85 x 45 mm silicone pad delivers 12.8 W/mK conductivity to bridge uneven surfaces between chips and heatsinks. The gray, non-curing material stays pliable across a -40 °C to 200 °C operating range. At 0.5 mm thick it conforms without excess pressure on delicate components.

Suits tight spaces needing electrical insulation

Builders fitting laptop GPUs, compact desktop cards or LED drivers will appreciate the single-pad format and natural tack. The 3.1 g/cc density and 30–55 Shore C hardness resist pump-out while remaining non-conductive at over 9.8 kV breakdown. Not suited for large-area CPU lids or builds requiring reusable phase-change sheets.

0.5 mm thickness defines the contact stack

This exact height determines whether the pad will seat correctly without lifting the cooler or leaving air gaps. Measure your specific stack-up before ordering; a thicker or thinner gap demands a different pad.

特長

  • Efficient heat transfer with 12.8 W/mK conductivity
  • Safe non-conductive insulation exceeding 9.8 kV breakdown voltage
  • Flexible gap-filling pad compresses to 0.5 mm thickness
  • Wide operating range from -40 °C to 200 °C
  • Reusable non-curing silicone stays effective over time

仕様

SeriesThermal Pad
Model85x45x3mm
Volume / Net Weight15g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What size heatsink surface is this 85 x 45 mm pad designed to cover?

The pad measures 85 mm by 45 mm with a 0.5 mm thickness, so it matches a heatsink footprint of those exact dimensions.

Can I stack this 12.8 W/mK pad on top of an older thermal pad that is still in place?

Stacking pads adds thermal resistance; remove the old material completely so the single 12.8 W/mK layer contacts both surfaces directly.

How do I confirm the pad is seated correctly after installation?

With the cooler mounted, the grey silicone should be evenly compressed to roughly 0.5 mm with no visible gaps or air bubbles around the edges.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。