暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with two M.2 slots and a 16-pin ribbon cable

LORDWORLD

LORDWORLD 2-Ch M.2 NVMe Adapter for Raspberry Pi 5 2280/2260/2242/2230

SKU CH-XVE1-ANKPT

Adds dual M.2 NVMe slots to Raspberry Pi 5 via 16-pin PCIe Gen2 link, supporting 2230 to 2280 drives with boot capability and onboard power monitoring

  • High-speed NVMe storage for Raspberry Pi 5 via 16-pin PCIe link
  • Dual M.2 slots accept 2230, 2242, 2260 and 2280 NVMe drives
  • Boot Raspberry Pi 5 directly from NVMe SSD for faster start-up
  • Onboard dual LED indicators show real-time drive activity
  • Power monitoring chip and EEPROM track SSD power status for stable operation

Dual NVMe Adapter for Raspberry Pi 5

This adapter adds two M.2 NVMe slots to a Raspberry Pi 5 through its 16-pin PCIe interface. It accepts 2230, 2242, 2260 and 2280 form factors and runs at PCIe x1 Gen 2 speeds. The board includes dual LED indicators, a power monitoring chip and an EEPROM for stable drive operation and easy status checks.

Makers needing fast local storage on Pi 5

The module suits developers who want to boot the Pi 5 from an NVMe drive or add high-speed storage for edge computing projects. It is not for users who need more than two NVMe drives, require PCIe Gen 3 or Gen 4 speeds, or want to connect drives using protocols other than NVMe.

PCIe x1 Gen 2 interface limit

The single lane Gen 2 link caps maximum throughput, so sequential read and write performance will be lower than on desktop platforms. This specification determines whether the adapter meets the bandwidth needs of a given Raspberry Pi 5 project.

特長

  • High-speed NVMe storage for Raspberry Pi 5 via 16-pin PCIe link
  • Dual M.2 slots accept 2230, 2242, 2260 and 2280 NVMe drives
  • Boot Raspberry Pi 5 directly from NVMe SSD for faster start-up
  • Onboard dual LED indicators show real-time drive activity
  • Power monitoring chip and EEPROM track SSD power status for stable operation

仕様

BrandLORDWORLD

この商品に関する質問

Will the 16-pin PCIe cable connect to my Raspberry Pi 5 if I also use a HAT that covers the GPIO header?

The adapter connects through the dedicated 16-pin PCIe port on the Raspberry Pi 5, leaving the 40-pin GPIO header free for other HATs or accessories.

How do I confirm both NVMe drives are active after installing them on the 2280 and 2230 slots?

Dual onboard LED indicators show the working status of each drive slot, letting you verify activity at a glance.

Does the package include the 16-pin cable and mounting hardware, or do I need to buy them separately?

The adapter board is supplied; the 16-pin PCIe cable and any mounting screws or standoffs are not included and must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。