暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular Raspberry Pi HAT with four USB-A ports, USB-to-UART chip and status LEDs

LORDWORLD

LORDWORLD 4 Port USB HUB HAT with USB to UART

SKU CH-Y0JQ-Q25M8

Adds four USB 2.0/1.1 ports and an onboard USB-to-UART converter with status LEDs for Raspberry Pi serial debugging

  • Adds four USB ports for peripherals
  • Supports USB 2.0 and 1.1 devices
  • Built-in USB to UART for serial debugging
  • Multi-indicator LEDs show power and port status
  • Designed to fit Raspberry Pi Zero models

Four-port USB HUB HAT for Raspberry Pi

This HAT adds four USB ports to a Raspberry Pi board and supports USB 2.0 and 1.1 devices. An onboard USB-to-UART converter provides a serial console for debugging. Multi-colour indicators show the status of power, the UART link and each individual USB port. The board fits Zero, Zero W and Zero WH form factors.

Sustained multi-device operation

The hub maintains USB 2.0 signalling across all four ports during continuous data transfers. The UART channel remains active for logging or kernel debugging while the USB ports handle peripherals. Indicator LEDs give immediate visual feedback on link health without host software queries. No active cooling is required for typical workloads.

Thermals, noise and power draw

The HAT draws power from the Raspberry Pi GPIO header and distributes it to the downstream ports. Passive components run cool under normal hub and UART loads. There are no moving parts, so acoustic output is zero. Total consumption scales with the attached USB devices rather than the HAT itself.

特長

  • Adds four USB ports for peripherals
  • Supports USB 2.0 and 1.1 devices
  • Built-in USB to UART for serial debugging
  • Multi-indicator LEDs show power and port status
  • Designed to fit Raspberry Pi Zero models

仕様

BrandLORDWORLD

この商品に関する質問

Does the HAT add noticeable heat or power draw when all four USB 2.0 ports run all day?

The HAT draws only the power each attached USB 2.0 device needs; it has no active cooling and the onboard indicators show port power status.

What Raspberry Pi model and header must I already own for this HAT to work?

It fits directly on any Raspberry Pi with a standard 40-pin GPIO header, including Zero, Zero W and Zero WH boards.

Will the onboard USB-to-UART debug link still function if I keep an older USB 1.1 peripheral plugged in?

Yes, the UART channel and all four USB ports operate independently, so USB 1.1 devices do not block serial debugging.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。