暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
LORDWORLD 5 inch DSI capacitive touchscreen development board, 800 by 480 resolution, glossy black finish, ribbon cable attached

LORDWORLD

LORDWORLD 5 Inch DSI Touchscreen 800×480 Capacitive Development Board

SKU CH-3092-93V1N

5-inch 800×480 capacitive touchscreen connects via DSI to Raspberry Pi and other boards, works driver-free on multiple operating systems, and supports five-point touch input

  • Plug-and-play on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee with no drivers needed
  • 5-point capacitive touch gives responsive multi-finger input for interactive projects
  • Native DSI link delivers 800×480 video while keeping HDMI and USB ports free
  • Works with Pi 5, 4, 3B+, 3A+, 3B, 2B, B+, A+, CM3, CM3+ and CM4 via adapter
  • Also runs on VisionFive2 (single touch) and Core3566 (5-point touch) under Debian or Ubuntu

5 Inch DSI Touchscreen for Raspberry Pi

This 5 inch capacitive display connects directly to the Raspberry Pi DSI port, supporting models from Pi 5 down to the original A+ and Compute Module 3 with an adapter. It targets makers and developers who need an integrated touchscreen without occupying the HDMI or USB ports.

800×480 resolution and 5-point touch capacity

The 800×480 panel provides enough pixel density for readable text and simple graphical interfaces on a 5 inch surface. Five simultaneous touch points allow multi-finger gestures, though VisionFive2 boards are limited to single touch under Debian and Ubuntu.

Driver-free DSI integration with multi-board support

Native DSI signalling keeps latency low and leaves HDMI and USB free for cameras, storage or other peripherals. The board works immediately on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee, and extends to VisionFive2 and Core3566 platforms without extra configuration.

特長

  • Plug-and-play on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee with no drivers needed
  • 5-point capacitive touch gives responsive multi-finger input for interactive projects
  • Native DSI link delivers 800×480 video while keeping HDMI and USB ports free
  • Works with Pi 5, 4, 3B+, 3A+, 3B, 2B, B+, A+, CM3, CM3+ and CM4 via adapter
  • Also runs on VisionFive2 (single touch) and Core3566 (5-point touch) under Debian or Ubuntu

仕様

BrandLORDWORLD

この商品に関する質問

Will this 800×480 DSI touchscreen work with my older Raspberry Pi 3B+ without extra drivers?

Yes, it connects via the native DSI interface on Pi 3B+ and is plug-and-play on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee with no driver installation required.

How can I confirm the 5-point capacitive touch is working correctly after I connect it?

After booting a supported OS, open a drawing or calibration tool and verify that up to five simultaneous touch points register accurately across the 800×480 panel.

Does the package include the Raspberry Pi board or any adapter needed for a Compute Module 4?

The box contains the 5-inch DSI touchscreen development board only; the Raspberry Pi board and any CM4 adapter must be purchased separately.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。