暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green ABS plastic case with eight relay modules and RS485 terminals

LORDWORLD

LORDWORLD 8-Channel Modbus RTU Relay Module RS485 10A development board

SKU CH-2ZP0-EJZRF

An 8-channel Modbus RTU relay module with RS485 communication, configurable addresses up to 255, 10A relay rating, and isolation protection for industrial control

  • Control 8 relays via Modbus RTU over RS485
  • Set device address 1-255 and cascade multiple modules
  • Power and magnetic isolation with TVS diode and resettable fuse
  • Timed flash-on/flash-off relay functions for automation
  • Rugged ABS case with 10A relays and optocoupler isolation

8-Channel Modbus RTU Relay Module

The LORDWORLD module provides eight independently addressable relays controlled over an RS485 bus using the Modbus RTU protocol. Each relay handles loads up to 10A, making the board suitable for switching industrial actuators, lighting circuits or small motors. A configurable device address from 1 to 255 allows many modules to share a single bus.

RS485 bus constraints and cascading

RS485 defines the electrical layer, so cable length, termination and baud rate must be planned by the installer; the module itself does not set those limits. Cascading multiple units is supported through address assignment, but total node count and bus loading remain the responsibility of the system designer. No Ethernet, Wi-Fi or other network interfaces are present on this board.

Rugged enclosure and rail mounting

The board is housed in a rugged ABS plastic case designed for DIN-rail installation inside control cabinets. High-quality relays and bi-directional optocoupler isolation protect the logic side from high-voltage transients on the field side. Power and magnetic isolation, a TVS diode and a resettable fuse add over-current and over-voltage protection. Multiple status LEDs show MCU and signal activity for quick diagnostics.

特長

  • Control 8 relays via Modbus RTU over RS485
  • Set device address 1-255 and cascade multiple modules
  • Power and magnetic isolation with TVS diode and resettable fuse
  • Timed flash-on/flash-off relay functions for automation
  • Rugged ABS case with 10A relays and optocoupler isolation

仕様

BrandLORDWORLD

この商品に関する質問

How many relays does this module provide for my application?

The board includes eight relay channels, each rated for up to 10 A, giving you eight independently switchable circuits in a single rail-mounted unit.

What does the 10 A relay rating mean when the module is installed in a cabinet?

Each channel can switch resistive loads up to 10 A at the rated voltage, so you can directly control heaters, motors or lighting circuits without an external contactor.

How does the RS485 Modbus RTU link limit the number of modules I can daisy-chain?

The protocol supports device addresses from 1 to 255, allowing up to 255 modules on one bus segment while the RS485 electrical layer handles the multi-drop wiring.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。