暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
LORDWORLD ESP32-S3 7 inch LCD development board with IPS display

LORDWORLD

LORDWORLD ESP32-S3 7 inch LCD Development Board Type B 1024×600

SKU CH-MNRR-TD82B

A 7-inch IPS touchscreen runs at 1024×600 with 65K colours and a 170° viewing angle, backed by an ESP32-S3 with adjustable backlight, lithium-battery monitoring and sensor, CAN.

  • Sharp visuals from 1024 × 600 IPS panel
  • Wide 170° viewing angle keeps colours accurate
  • Adjustable backlight suits bright or dim settings
  • Built-in lithium battery voltage monitoring aids portable use
  • Expand via sensor, CAN, RS485 and I2C interfaces

ESP32-S3 7 inch IPS Development Board

The LORDWORLD board integrates an ESP32-S3 microcontroller with a 7 inch IPS LCD panel that shows 1024 × 600 pixels at 65K colour depth. Adjustable backlight and a 170° viewing angle keep the image readable from different positions. On-board lithium battery voltage monitoring adds convenience for portable prototypes.

Target users and limitations

Makers building IoT edge devices that need a built‑in colour touchscreen, CAN, RS485 or I2C expansion will find the interfaces ready to use. Developers who require a larger display, higher pixel density or a different processor architecture should evaluate alternative platforms.

Sustained operation behaviour

The IPS panel maintains consistent colour and contrast during long running sessions without the wash‑out seen in some TN screens. Backlight adjustment lets the system reduce power draw and heat when full brightness is unnecessary. The ESP32-S3 continues to service sensor, CAN and RS485 traffic reliably over extended periods.

特長

  • Sharp visuals from 1024 × 600 IPS panel
  • Wide 170° viewing angle keeps colours accurate
  • Adjustable backlight suits bright or dim settings
  • Built-in lithium battery voltage monitoring aids portable use
  • Expand via sensor, CAN, RS485 and I2C interfaces

仕様

BrandLORDWORLD

この商品に関する質問

What power source is required for the lithium battery voltage monitoring feature on this board?

A lithium battery must be connected to the board for the voltage monitoring function to operate.

Can I connect legacy RS485 sensors to the available interfaces on this development board?

Yes, the board includes an RS485 interface that supports expansion with compatible peripherals.

How can I verify the display is operating at the correct 1024 × 600 resolution after setup?

The screen will render 65K colours across the 7 inch IPS panel at a 170° viewing angle when configured properly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。