暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with ESP32 chip, servo connectors, and pin headers

LORDWORLD

LORDWORLD ESP32 Servo Driver Expansion Board 253 Servos

SKU CH-247D-KETQC

Controls up to 253 serial bus servos via ESP32 with Wi-Fi, Bluetooth and ESP-NOW for remote robot projects

  • Controls up to 253 serial bus servos simultaneously
  • Wide 6-12V input range matches servo voltage needs
  • Built-in WiFi, Bluetooth and ESP-NOW enable wireless control
  • Automatic download circuit simplifies program uploading
  • Compact design fits space-constrained robotics projects

ESP32 Servo Driver for 253 Serial Bus Servos

This LORDWORLD expansion board is an ESP32-based IoT edge device built to drive SC and ST series serial bus servos. It suits makers and robotics developers who need to coordinate large numbers of servos from a single compact controller. Built-in WiFi, Bluetooth and ESP-NOW enable wireless operation and remote debugging.

Simple Upload Circuit

An automatic download circuit streamlines firmware uploads so code can be pushed without manual boot toggles. The board accepts a wide 6-12V input range, but the supply voltage must match the servo voltage to avoid damage. Adequate current capacity is essential when driving all 253 channels simultaneously.

For Large-Scale Servo Projects in Tight Spaces

The compact footprint fits space-constrained robots, hexapods and animatronics where dozens of servos must share one controller. Open-source web tools and example structures accelerate development. Builders needing only a few servos or a different bus protocol should consider simpler driver boards.

特長

  • Controls up to 253 serial bus servos simultaneously
  • Wide 6-12V input range matches servo voltage needs
  • Built-in WiFi, Bluetooth and ESP-NOW enable wireless control
  • Automatic download circuit simplifies program uploading
  • Compact design fits space-constrained robotics projects

仕様

BrandLORDWORLD

この商品に関する質問

How can I verify the board is communicating with all 253 SC or ST servos after wiring?

Power the board with 6-12 V matching the servo voltage, open the open-source web app via Wi-Fi or Bluetooth, and confirm each servo ID responds to test commands.

What ships with the expansion board and what must I source separately?

The board itself is supplied; you must provide a 6-12 V power supply, the SC or ST serial bus servos, and any mounting hardware.

Which servo series should I select to work with this driver?

Choose SC or ST series serial bus servos, as the board is designed specifically for those protocols and supports up to 253 units.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。