暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
LORDWORLD MCIO 8i to dual OCuLink 4i cable, .5 m, locking latches

LORDWORLD

LORDWORLD MCIO 8i SFF-TA-1016 to 2x OCuLink 4i SFF-8611 Cable 0.5m

SKU CH-3XS3-FABB8

Connects an MCIO 8i SFF-TA-1016 port to two OCuLink 4i SFF-8611 devices with a 0.5 m cable supporting PCIe 4.0 speeds and locking latches

  • 5 m length fits tight server builds
  • PCIe 4.0 transfer speeds meet SFF-TA-1016 and SFF-8611 specs
  • Locking OCuLink latches keep cables secure under vibration
  • SFF-9402 compliant design works with mainstream NVMe HBA and RAID cards
  • Single MCIO 8i splits to two OCuLink 4i ports

MCIO 8i to Dual OCuLink Adapter

This LORDWORLD adapter cable converts a single MCIO 8i SFF-TA-1016 port into two OCuLink 4i SFF-8611 connections. It enables direct attachment of NVMe storage devices to compatible tri-mode HBA or RAID controllers. The 0.5 metre length suits internal routing within server or workstation chassis. Builders expanding high-speed storage arrays will find this cable matches the required interface.

SFF-9402 Compliant Build with Locking Latches

Connectors follow SFF-TA-1016 and SFF-8611 design specifications for reliable mating. The OCuLink ends feature locking latches that resist accidental disconnection during vibration or maintenance. Cable construction meets SFF-9402 requirements, supporting signal integrity for PCIe 4.0 transfer speeds. The fixed 19.69 inch length reduces excess slack that can impede airflow in dense enclosures.

Enables Dual NVMe Links from One Controller Port

Splitting one MCIO 8i interface into two OCuLink 4i paths lets a single controller port drive two separate NVMe devices. This topology simplifies cabling for dual-drive configurations without consuming additional controller slots. The adapter ships as a standalone cable; no driver installation or configuration software is required. Systems lacking an MCIO 8i source port cannot use this cable.

特長

  • 5 m length fits tight server builds
  • PCIe 4.0 transfer speeds meet SFF-TA-1016 and SFF-8611 specs
  • Locking OCuLink latches keep cables secure under vibration
  • SFF-9402 compliant design works with mainstream NVMe HBA and RAID cards
  • Single MCIO 8i splits to two OCuLink 4i ports

仕様

BrandLORDWORLD

この商品に関する質問

What PCIe generation does the MCIO 8i to dual OCuLink cable support?

The cable meets PCIe 4.0 specifications for transfer speeds across both OCuLink 4i connections.

What clearance is needed for the MCIO 8i SFF-TA-1016 connector?

The MCIO 8i plug follows the SFF-TA-1016 form factor and requires a standard MCIO 8i port on the host card or backplane.

How do you secure the OCuLink ends so they do not disconnect under vibration?

Each OCuLink 4i connector has a locking latch; press the connector fully into the port until the latch clicks into place.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。