暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small aluminium box with DB9 port, RJ45 jack and screw terminals

LORDWORLD

LORDWORLD RS232 to RS485 Isolated Converter with Screw Terminal and RJ45

SKU CH-25BS-85XJZ

Converts RS232 to RS485 with ADI magnetic isolation, TVS protection, 300–115200 bps rates, 120 Ω termination switch, 6–36 V DC input and 1200 m reach

  • Converts RS232 to balanced differential RS485 signals
  • ADI magnetic isolation provides signal isolation and anti-interference
  • 1200m transmission distance at 300~115200bps rates
  • 6V~36V DC wide-range input with no extra supply needed
  • Aluminium alloy enclosure with sand blasting and anodic oxidation

Industrial RS232-to-RS485 Isolated Converter

This LORDWORLD converter translates RS232 signals into balanced differential RS485 for industrial and maker projects. It integrates ADI magnetic isolation and an onboard isolated power supply so no external source is needed for the isolated side. A DB9 female port handles RS232 while screw terminals and an RJ45 jack provide RS485 connectivity. The aluminium enclosure resists harsh environments.

Sustained-load behaviour

ADI magnetic isolation and TVS suppression maintain signal integrity during continuous operation at up to 115200 bps. The onboard resettable fuse and protection diodes regulate current and voltage without degradation over long runs. Three LEDs give instant visibility of power, transmit and receive activity so operators can verify link health in real time. The wide 6 V to 36 V DC input tolerates supply fluctuations common in factory settings.

RS485 bus practical limits

The optional 120 Ω termination resistor is switched on or off to match bus topology and reduce reflections. RS485 differential signalling supports cable runs up to 1200 m at lower baud rates, though maximum distance drops as speed increases toward 115200 bps. Multi-drop networks require careful biasing and termination planning beyond what a single converter can guarantee. Shielded twisted-pair cabling and proper grounding remain essential for reliable operation.

特長

  • Converts RS232 to balanced differential RS485 signals
  • ADI magnetic isolation provides signal isolation and anti-interference
  • 1200m transmission distance at 300~115200bps rates
  • 6V~36V DC wide-range input with no extra supply needed
  • Aluminium alloy enclosure with sand blasting and anodic oxidation

仕様

BrandLORDWORLD

この商品に関する質問

How much power does the LORDWORLD RS232 to RS485 converter draw when running continuously?

The onboard unibody power supply isolation provides stable isolated voltage with low power consumption, needing no extra supply for the isolated terminal.

What power source and cables must I already have to use this converter?

You need a 6V to 36V DC source for the DC-005 jack, a DB9 female cable for the RS232 side, and either screw-terminal or RJ45 wiring for the RS485 side.

Will this converter work reliably with legacy RS232 equipment operating at lower baud rates?

Yes, it supports stable transmission from 300 to 115200bps and includes a switchable 120R termination resistor for the RS485 line.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。