暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Coiled 1.75 mm PLA filament spool, metallic Patina Bronze finish

MakerBot

MakerBot 375-0082A Metallic PLA Filament Patina Bronze 1.75mm 2.2 Lb 3D Printers Accessories

SKU CH-6DSE-72M1C

Metallic PLA filament in Patina Bronze creates shiny, attention-grabbing prints for student awards and prototypes, compatible with Sketch and Sketch Large printers

  • ColorPatina Bronze
  • Metallic Patina Bronze finish makes prints shine and capture attention
  • 75 mm diameter and 2.2 lb spool sized for long, uninterrupted runs
  • Compatible with MakerBot Sketch and Sketch Large printers for reliable extrusion
  • Polylactic Acid material prints cleanly for classroom awards and prototypes
  • 1 inch cube spool dimensions fit standard printer bays without adapters

Metallic PLA Filament for MakerBot Sketch

This metallic PLA filament produces shiny prints that capture attention and add prestige to student projects. It comes in a Patina Bronze finish suited for awards and prototypes. The spool holds 2.2 lbs of 1.75 mm diameter material.

Best for Sketch and Sketch Large owners

Teachers and students using MakerBot Sketch or Sketch Large printers will find this filament fully compatible. Buyers who operate other printer brands or need a different colour should look at alternative spools. Users wanting non-metallic standard PLA will also need another product.

1.75 mm diameter ensures fit

The filament diameter of 1.75 mm is the single specification that decides whether this spool works with your machine. Only printers accepting 1.75 mm filament can use this product. Check your printer's specification before ordering.

特長

  • Metallic Patina Bronze finish makes prints shine and capture attention
  • 75 mm diameter and 2.2 lb spool sized for long, uninterrupted runs
  • Compatible with MakerBot Sketch and Sketch Large printers for reliable extrusion
  • Polylactic Acid material prints cleanly for classroom awards and prototypes
  • 1 inch cube spool dimensions fit standard printer bays without adapters

仕様

BrandMakerbot
Model375-0082A
ColorPatina Bronze

この商品に関する質問

What filament diameter does the 1.75 mm Patina Bronze spool use and what printers does it support?

The spool is 1.75 mm diameter PLA and is made for MakerBot Sketch and Sketch Large printers.

What are the spool dimensions and net weight so I can check fit on my Sketch printer?

The spool measures 9.1 x 9.1 x 9.1 inches and contains 2.2 lbs of filament.

How do I load the Metallic PLA on a Sketch printer without jamming the extruder?

Preheat the nozzle to the PLA temperature, cut the tip cleanly, and feed the filament until it extrudes steadily; the metallic particles can clog a cold nozzle if forced too early.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。