暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Orange PLA filament spool in vacuum-sealed metallised bag

MakerBot

MakerBot PLA Filament 375-0017A True Orange 0.75kg 1.75mm

SKU CH-YF7P-NT4XS

PLA filament spool for office-friendly prototyping, biodegradable, vacuum-sealed with RFID-tracked Smart Spool and built-in desiccant

  • Easy office prototyping with rigid, glossy PLA parts
  • Breakaway supports print and remove faster than dissolvable alternatives
  • Corn-based biodegradable material reduces environmental impact under industrial composting
  • Vacuum-sealed metalized bag preserves filament quality until opened
  • RFID Smart Spool tracks material type, colour and remaining amount

Purpose and audience

MakerBot PLA Filament 375-0017A is a 1.75 mm polylactic acid spool made for Method 3D printers. It suits engineers and designers who need rigid, glossy concept models in an office setting. The material prints easily with breakaway supports that are faster to print and remove than dissolvable alternatives. Buyers who need high-temperature resistance or flexible parts should choose a different filament.

Handling and storage

Each 0.75 kg spool ships vacuum-sealed in a metalized polyester bag with a built-in desiccant to keep moisture out until first use. The Smart Spool carries an RFID chip that reports material type, colour and remaining length directly to MakerBot Print software. Filament diameter is manufactured to tight tolerances so extrusion stays consistent without extra drying steps.

Deciding specification

The spool holds 0.75 kg of 1.75 mm PLA in True Orange and is identified by MPN 375-0017A. This weight and diameter combination determines whether the reel fits the Method material bay and covers the intended print volume.

特長

  • Easy office prototyping with rigid, glossy PLA parts
  • Breakaway supports print and remove faster than dissolvable alternatives
  • Corn-based biodegradable material reduces environmental impact under industrial composting
  • Vacuum-sealed metalized bag preserves filament quality until opened
  • RFID Smart Spool tracks material type, colour and remaining amount

仕様

BrandMakerbot
Model375-0017A

この商品に関する質問

How is the 375-0017A spool installed on the Method printer and what step is often missed?

Place the spool on the holder, feed the 1.75mm filament into the extruder, and let the RFID chip on the Smart Spool automatically register the material type and remaining amount in MakerBot Print.

What maintenance or replacement will this 0.75kg PLA spool need later?

The filament itself is consumed during printing; the vacuum-sealed metalized bag preserves quality until opened, and the built-in desiccant absorbs moisture during loading.

What limit appears first during a long print with this True Orange PLA?

The 0.75kg spool capacity sets the maximum continuous print length before a new spool must be loaded.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。