暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two small green ESP32-CAM-MB boards with OV2640 camera modules and micro USB ports

MCDODO

MCDODO ESP32-CAM-MB 2PCS Development Board with OV2640 2MP Camera

SKU CH-2QJ6-0K431

Two ESP32-CAM-MB boards with OV2640 2MP cameras and integrated USB-to-serial for direct programming

  • TypeSingle Board Computers
  • Dual-mode wireless with 802.11 b/g/n and BT/BLE
  • 240 MHz dual-core processor handles real-time image processing
  • 2 MP OV2640 camera captures stills and video streams
  • Micro USB with CH340G enables direct serial programming
  • Ultra-low 6 mA deep-sleep current extends battery life

Dual ESP32 camera kit

This pack contains two ESP32-CAM-MB boards each fitted with an OV2640 2MP camera module. The boards integrate a dual-mode Wi-Fi and Bluetooth SoC with two 32-bit LX6 CPUs running at 80 MHz to 240 MHz. They are aimed at makers building IoT edge devices that need wireless image capture.

Micro USB and CH340G serial

Each board ships with a Micro USB connector and an on-board CH340G USB-to-serial adapter so no external programmer or complex wiring is required. The PCB antenna handles wireless traffic while the module can operate as a standalone minimal system. Deep-sleep current drops to 6 mA for battery-powered deployments.

802.11 b/g/n and Mac caveat

Wireless connectivity is limited to 802.11 b/g/n rates so high-bandwidth streaming is not practical. The supplier notes that the board works with most Windows systems but may have compatibility issues on Mac platforms. Buyers needing 5 GHz Wi-Fi or guaranteed macOS support should look elsewhere.

特長

  • Dual-mode wireless with 802.11 b/g/n and BT/BLE
  • 240 MHz dual-core processor handles real-time image processing
  • 2 MP OV2640 camera captures stills and video streams
  • Micro USB with CH340G enables direct serial programming
  • Ultra-low 6 mA deep-sleep current extends battery life

仕様

TypeSingle Board Computers

この商品に関する質問

What USB interface does the board use for programming and power?

The board uses a Micro USB connector linked to an on-board CH-340G USB-to-serial converter for both power and code uploads.

What physical space is needed to mount the two boards and camera modules?

Each board is a compact PCB with an OV2640 2MP camera; allow room for the Micro USB port, pin headers and the camera flex on both units.

How do I flash firmware and which download mode should I select?

Connect via Micro USB, choose manual or automatic download mode in the IDE, then press the on-board reset button if the upload stalls.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。