暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal Bitcoin miner with vented sides and front fan grille

Mining Syndicate

Mining Syndicate Whatsminer M30S 110 Th/s mining hardware

SKU CH-2GYR-88634

Bitcoin ASIC miner delivering 110 Th/s at 3,472 W, weighs 20 lb and requires 220 V power

  • Delivers 110 Th/s hashrate for high Bitcoin output
  • Draws 3,472 W for efficient power-to-performance ratio
  • Weighs 20 lb for manageable rack installation
  • Requires 220 V supply for stable industrial operation
  • Includes 12-month manufacturer warranty for purchase protection

Whatsminer M30S 110 Th/s Bitcoin ASIC miner

The Whatsminer M30S is a dedicated Bitcoin ASIC miner delivering a hash rate of 110 Th/s. It draws 3,472 Watts and weighs about 20 pounds. The unit is supplied new with a 12-month manufacturer warranty.

Suited for operators with 220 V power

This hardware requires a 220 V outlet; a small step-down transformer will not work. The miner runs very loud and generates intense heat, so significant airflow is essential. Buyers without access to 220 V supply or adequate cooling should consider other options.

110 Th/s hash rate at 3,472 Watts power draw

The single specification that determines suitability is the 110 Th/s throughput at 3,472 Watts. Match this ratio to your electricity cost and cooling capacity to decide if the unit fits your operation.

特長

  • Delivers 110 Th/s hashrate for high Bitcoin output
  • Draws 3,472 W for efficient power-to-performance ratio
  • Weighs 20 lb for manageable rack installation
  • Requires 220 V supply for stable industrial operation
  • Includes 12-month manufacturer warranty for purchase protection

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What power draw does the 110 Th/s hash rate cap at in practice?

The unit draws 3,472 watts while delivering 110 Th/s, so the power interface must supply that full load continuously.

What outlet and space are needed to fit the 20-pound miner?

A 220 V outlet is required; a small step-down transformer will not work, and the chassis needs clear airflow for heat exhaust.

How is the miner installed and what step do people miss?

Connect the 220 V supply, attach network, power on, then configure the pool; the step often missed is providing enough ventilation for the hot exhaust.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。