BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
MSI
ATX board for Intel Core 12th, 13th and 14th Gen CPUs with dual-channel DDR5 up to 7200 MHz and 192 GB capacity
The MSI MPG Z790 EDGE TI MAX WIFI is an ATX motherboard built on the Intel Z790 chipset for LGA 1700 processors. It supports 12th, 13th and 14th Gen Intel Core, Pentium Gold and Celeron CPUs. Dual-channel DDR5 memory scales up to 192GB with speeds reaching 7200 MHz when overclocked.
This board suits builders who need high memory capacity and a broad rear USB selection including 20Gbps Type-C. The three PCIe slots provide one x16 Gen 5.0, one x4 Gen 4.0 and one x1 Gen 3.0 lane arrangement. Builds requiring more than three expansion slots or a different form factor should consider other options.
The maximum supported memory is 192GB of DDR5 across four slots. This ceiling decides whether the platform can handle large datasets, heavy virtualisation or content-creation workloads. Verify your kit density and speed against the qualified vendor list before purchasing.
| Brand | MSI |
|---|---|
| Series | MSI MPG Z790 EDGE TI MAX WIFI |
| Model | MSI MPG Z790 EDGE TI MAX WIFI |
| CPU Socket Type | LGA 1700 |
| CPU Type | Support Intel Core™ 14th/ 13th/ 12th Gen Processors, Intel Pentium Gold and Celeron Processors LGA 1700 |
| Chipset | Intel Z790 |
| Memory Standard | Support dual-channel DDR5 7200 + (OC)/7000 (OC)/6800 (OC)/6600 (OC)/6400 (OC)/6200 (OC)/6000 (OC)/5800 (OC)/5600 (JEDEC)/5400 (JEDEC)/5200 (JEDEC)/5000 (JEDEC)/4800 (JEDEC) MHz memory |
| Maximum Memory Supported | 192GB |
| PCI Slots | 2X PCI-E x16 slots (quantity) 1X PCI-E x1 slot (quantity) PCI_E1 Gen PCIe 5.0 supports up to x16 (From CPU) PCI_E2 Gen PCIe 3.0 supports up to x1 (From Chipset) PCI_E3 Gen PCIe 4.0 supports up to x4 (From Chipset) |
| SATA RAID | 5XM.2 interface, 8xSATA III interface |
| Audio Chipset | Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-Bit/384 kHz playback on front panel |
| LAN Chipset | Intel 2.5Gbps LAN |
| Onboard USB | 4X USB 2.0 (front) 4x USB 5Gbps Type A (Rear) 2x USB 5Gbps Type A (Front) 4x USB 10Gbps Type A (Rear) 1x USB 10Gbps Type C (Rear) 1x USB 10Gbps Type C (Front) 1x USB 20Gbps Type C (Rear) |
The board follows the standard ATX layout, so it requires a case that accepts ATX motherboards with the usual nine mounting holes and rear I/O cutout.
Lift the socket lever, align the processor triangle with the socket marker, lower the CPU gently, close the frame, then secure the lever — many builders forget to remove the protective cover from the socket before seating the CPU.
The CMOS battery on the board will eventually lose charge and should be replaced when BIOS settings or the system clock no longer hold after power loss.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?