暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black nylon-sleeved 24-pin ATX extension cable, 30 cm long, 18AWG

myVolts

myVolts 24-pin ATX Extension Cable 30 cm 18AWG

SKU CH-YP2H-R18D7

A 30 cm 24-pin ATX extension cable built with 18AWG wire and nylon sleeving for tidy PSU routing

  • TypeAT
  • 24-pin ATX extension adds 30 cm reach for flexible PSU placement
  • 18 AWG conductors with 150 strands of 0.08 mm copper deliver reliable power
  • Nylon sleeved jacket protects wires and keeps builds tidy
  • Male-to-female connectors plug straight into existing cables with no tools
  • 3 m length suits compact cases and custom routing

Extension Cable for ATX 24-pin Power

This myVolts cable extends a standard ATX 24-pin motherboard connector by 30 cm. It uses 18AWG conductors with a 150-core 0.08TS construction and a nylon-sleeved jacket. The male-to-female design connects directly between the power supply and the motherboard. It is intended for PC builders who need extra reach inside a case.

Replaces Short or Stiff Stock Cables

The extension replaces a factory cable that is too short or too rigid to route cleanly behind a motherboard tray. The 30 cm length adds enough slack for larger chassis or non-standard PSU placement. The jump is worth it when the original cable cannot reach the 24-pin socket without tension or sharp bends. No electrical change occurs; only the physical reach is improved.

Suits Custom Builds Needing Modest Extra Length

This cable suits builders who need a short, flexible extension for cable management in mid-tower or full-tower cases. It is not for users who require a longer run beyond 30 cm or who need a different pin configuration such as EPS 8-pin. Buyers wanting a full replacement cable kit or a different colour should look elsewhere.

特長

  • 24-pin ATX extension adds 30 cm reach for flexible PSU placement
  • 18 AWG conductors with 150 strands of 0.08 mm copper deliver reliable power
  • Nylon sleeved jacket protects wires and keeps builds tidy
  • Male-to-female connectors plug straight into existing cables with no tools
  • 3 m length suits compact cases and custom routing

仕様

TypeAT

この商品に関する質問

How much space does the 30 cm 24-pin ATX extension need behind the motherboard tray?

The cable is 30 cm long and uses 18 AWG conductors with a nylon sleeve, so allow roughly 30 cm of clearance plus room for the 24-pin connector depth.

Which way round do the male and female 24-pin connectors go when installing the extension?

Plug the male end into the PSU’s 24-pin output and the female end onto the motherboard’s 24-pin socket; reversing them will prevent the system from powering on.

When should the 18 AWG 24-pin extension be replaced?

Replace the cable if the nylon sleeve frays, any of the 150 individual 0.08 TS strands break, or the 24-pin connectors show melted pins or loose retention clips.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。