暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 24-pin dual PSU adapter cable with 20+4 main connector and two secondary connectors 85cm length

myVolts

myVolts 24Pin Dual PSU Adapter 20+4 85cm 2000W power supply

SKU CH-SV9K-BJP9E

Connects up to three PSUs to one motherboard via 24-pin 20+4 interfaces with 85 cm cables for up to 2000 W systems

  • TypeAT
  • Connect up to three PSUs to one motherboard via 24-pin 20+4 main and two secondary connectors
  • Combine two power units for higher output without replacing existing hardware up to 2000 W
  • 20+4 pin design works with both 24-pin and 20-pin motherboard sockets
  • 85 cm thin cable keeps routing tidy while maintaining stable power delivery
  • Solves GPU power shortages that cause clock throttling under load

Dual PSU adapter for multi-unit builds

This adapter lets three ATX power supplies feed one motherboard through a single 24-pin connector. It targets builders who need extra wattage for high-end graphics cards without replacing an existing unit. The 20+4-pin main plug works with both 24-pin and 20-pin motherboard headers.

Compact 85 cm cable with ABS and metal ends

The 85 cm length keeps routing tidy inside full-tower cases while reaching dual PSU mounts. Female 24-pin sockets on all three branches accept standard ATX cables directly, so no soldering or crimping is required. The mixed ABS and metal construction resists bending stress during installation.

Ships as a single ready-to-use cable

Only the adapter cable itself is included — no extra screws, software or documentation. It supports combined loads up to 2000 W across the connected units and is compatible with Windows and Linux systems. Buyers who need modular sleeving kits or additional PCIe power splitters must source them separately.

特長

  • Connect up to three PSUs to one motherboard via 24-pin 20+4 main and two secondary connectors
  • Combine two power units for higher output without replacing existing hardware up to 2000 W
  • 20+4 pin design works with both 24-pin and 20-pin motherboard sockets
  • 85 cm thin cable keeps routing tidy while maintaining stable power delivery
  • Solves GPU power shortages that cause clock throttling under load

仕様

TypeAT

この商品に関する質問

What motherboard power connector does the 20+4 pin main cable support?

The main cable uses a 24-pin female connector split as 20+4 pins, so it fits both 24-pin and 20-pin motherboard sockets.

How much clearance does the 85 cm cable need inside a case?

The cable is approximately 85 cm (33.5 in) long, so allow at least that much routing space between the PSU mounting points and the motherboard connector.

Which power supply plugs into the 20+4 pin connector during installation?

The primary PSU connects to the single 20+4 pin female plug; the two additional PSUs attach to the other 24-pin female plugs, and all three must be switched on together.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。