暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact silver TFX power supply unit with rear fan grille and cable bundle

myVolts

myVolts 300 W TFX Power Supply for HP Slimline

SKU CH-RW45-JRT1W

TFX form-factor unit delivering 300 W with 20+4-pin, 12 V P4, SATA, Molex and floppy connectors for listed HP Slimline models

  • TypeAT
  • 300 W upgrade supports extra components in slim desktops
  • TFX form factor fits HP Slimline chassis directly
  • 20+4 pin main connector works with 20 or 24 pin boards
  • 40 mm ball-bearing fan with thermal speed control manages heat quietly
  • Compatible with multiple HP Slimline part numbers for easy replacement

Fits HP Slimline desktops

This 300 W TFX power supply replaces the original unit in HP Slimline models including AY004AA, KY713AA, KY714AA, KY715AA, KY766AA and KY767AA. It delivers higher wattage than the factory supply to support additional internal devices. The compact TFX form factor matches the slim chassis exactly.

Suits owners adding drives or cards.

Builders upgrading a compatible Slimline with extra hard drives, optical drives or a low-profile expansion card will benefit from the extra power headroom. The unit is not suitable for standard ATX or micro-ATX cases that require a full-size PSU. It also cannot support high-end graphics cards that need dedicated PCIe power connectors.

Single 12 V rail rated at 9 A per rail

The label specifies +12V1 at 9 A and +12V2 at 9 A, giving a combined 12 V capacity that limits the graphics card tier you can run. Check your GPU’s power draw against this figure before buying. The supply provides one 20+4 pin main connector, one 4-pin P4 connector, three Molex, three SATA and one floppy lead.

特長

  • 300 W upgrade supports extra components in slim desktops
  • TFX form factor fits HP Slimline chassis directly
  • 20+4 pin main connector works with 20 or 24 pin boards
  • 40 mm ball-bearing fan with thermal speed control manages heat quietly
  • Compatible with multiple HP Slimline part numbers for easy replacement

仕様

TypeAT

この商品に関する質問

How do I install the 20+4 pin main connector on an older 20-pin motherboard?

Align the 20-pin section with the motherboard socket and leave the extra 4 pins unplugged; the split design fits both 20-pin and 24-pin boards without adapters.

Which component will likely need replacement first in this unit?

The internal 40mm ball-bearing fan is the only moving part and will wear out before the solid-state circuitry under continuous operation.

What thermal limit appears first during sustained full-load use?

The operating ceiling is 50 °C; once the case interior reaches that temperature the supply can no longer guarantee rated output.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。