暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular aluminium power supply with three-pin plug and output leads

myVolts

myVolts 30W IP67 12V 2.5A Power Supply

SKU CH-8NKF-AVJFJ

Converts 90-265V AC to 12V DC at 2.5A with IP67 waterproof protection for outdoor LED use

  • TypeAT
  • Aluminium housing dissipates heat for stable operation
  • IP67 rating protects against water ingress outdoors
  • Wide 90-265 V AC input suits global mains voltages
  • Delivers 12 V DC at 2.5 A for 30 W LED loads
  • Automatic short-circuit, overload and over-temperature protection with auto-recovery

30W IP67 LED Driver

This 30W IP67 power supply converts 90-265V AC input to 12V DC at 2.5A for LED strips, bulbs and other 12V lighting projects. The aluminium alloy housing provides heat dissipation and full waterproof protection for outdoor installations. It suits installers who need a compact, sealed driver for permanent outdoor or damp-location use.

Sustained-load behaviour

Automatic protection covers short circuit, overload, over voltage, over current and high temperature using hiccup-mode auto-recovery once the fault clears. The metal enclosure maintains stable output during continuous operation without thermal throttling. It is not for buyers who need adjustable voltage or higher wattage for large LED arrays.

Installation notes

The unit includes a 3-prong AC plug for direct mains connection and low-voltage DC output terminals for LED wiring. IP67 sealing means no extra weatherproofing is required, but the fixed cable lengths limit placement flexibility. It is not for builders who need a DIN-rail mount or screw-terminal AC input for enclosure integration.

特長

  • Aluminium housing dissipates heat for stable operation
  • IP67 rating protects against water ingress outdoors
  • Wide 90-265 V AC input suits global mains voltages
  • Delivers 12 V DC at 2.5 A for 30 W LED loads
  • Automatic short-circuit, overload and over-temperature protection with auto-recovery

仕様

TypeAT

この商品に関する質問

How much heat does the aluminium housing need to shed when the supply runs at 30W continuously?

The aluminium alloy housing is designed for heat dissipation to maintain stability at the rated 30W output.

What AC mains plug and voltage range must be available on site for the 90-265V input?

A three-prong plug and a mains supply between 90 and 265V AC at 50 or 60Hz are required.

Can the 12V 2.5A output run legacy 12V LED strips that draw less than 30W without triggering protection?

Yes, the hiccup-mode protection only activates on short circuit, overload, over-voltage, over-current or over-temperature, so lighter loads run normally.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。