BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
myVolts
Delivers 450 W through a 20/24-pin main connector and three SATA connectors, cooled by a 120 mm ball-bearing fan rated at 32 dB with 70 % minimum efficiency and 100,000-hour MTBF
This myVolts unit delivers 450 W through a standard ATX form factor with a 20/24 pin main connector that fits both 20 pin and 24 pin motherboards. A 115/230 V voltage switch lets it operate on either mains standard. It is aimed at builders assembling or repairing entry-level Intel or AMD systems that need reliable baseline power.
The bundle includes three SATA connectors, three peripheral connectors and one floppy connector alongside a single 4 pin ATX12V plug for the processor. No PCIe power leads are present, so the unit suits graphics cards that draw all power from the slot. The mixed connector set covers older and current storage devices without needing adapters.
A 120 mm ball-bearing fan handles cooling while an 80 mm internal fan assists airflow inside the 5.9 by 3.9 by 5.5 inch chassis. Efficiency is rated at 70 % minimum at full load and the unit carries TUV, RU and CE safety approvals. MTBF is specified at 100000 hours under ambient conditions. Overvoltage and short-circuit protection cover all outputs.
| Type | AT |
|---|
The supply is rated for 450W output with a minimum of 70% efficiency at full load.
The ball-bearing fan produces a maximum of 32dB at 100% system loading.
The 20/24 pin main board connector works on both 20 pin and 24 pin motherboards.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?