Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Rectangular ATX power supply unit with 120mm fan grille and voltage switch

myVolts

myVolts 450W ATX power supply 120mm fan SATA 20/24pin 4pin

SKU CH-A7WV-DWQMT

Delivers 450 W through a 20/24-pin main connector and three SATA connectors, cooled by a 120 mm ball-bearing fan rated at 32 dB with 70 % minimum efficiency and 100,000-hour MTBF

  • TypeAT
  • Quiet operation with 120 mm fan at 32 dB max
  • Dual-voltage input switch covers 115 V and 230 V mains
  • Broad compatibility supports Intel and AMD ATX platforms
  • Multiple connectors include 3 SATA, 3 Peripheral and 20/24-pin main
  • Rated 100,000 hrs MTBF with 70 % minimum efficiency

450 W ATX power supply for mainstream builds

This myVolts unit delivers 450 W through a standard ATX form factor with a 20/24 pin main connector that fits both 20 pin and 24 pin motherboards. A 115/230 V voltage switch lets it operate on either mains standard. It is aimed at builders assembling or repairing entry-level Intel or AMD systems that need reliable baseline power.

Connectors free up drive bays and CPU power

The bundle includes three SATA connectors, three peripheral connectors and one floppy connector alongside a single 4 pin ATX12V plug for the processor. No PCIe power leads are present, so the unit suits graphics cards that draw all power from the slot. The mixed connector set covers older and current storage devices without needing adapters.

120 mm ball-bearing fan runs at 32 dB maximum

A 120 mm ball-bearing fan handles cooling while an 80 mm internal fan assists airflow inside the 5.9 by 3.9 by 5.5 inch chassis. Efficiency is rated at 70 % minimum at full load and the unit carries TUV, RU and CE safety approvals. MTBF is specified at 100000 hours under ambient conditions. Overvoltage and short-circuit protection cover all outputs.

Najważniejsze cechy

  • Quiet operation with 120 mm fan at 32 dB max
  • Dual-voltage input switch covers 115 V and 230 V mains
  • Broad compatibility supports Intel and AMD ATX platforms
  • Multiple connectors include 3 SATA, 3 Peripheral and 20/24-pin main
  • Rated 100,000 hrs MTBF with 70 % minimum efficiency

Specyfikacja

TypeAT

Pytania dotyczące tego produktu

How much power can the 450W unit deliver continuously before efficiency drops below 70%?

The supply is rated for 450W output with a minimum of 70% efficiency at full load.

What is the maximum noise level when the 120mm fan runs at 100% system loading?

The ball-bearing fan produces a maximum of 32dB at 100% system loading.

Which motherboard power connector does the 20/24 pin ATX connector support?

The 20/24 pin main board connector works on both 20 pin and 24 pin motherboards.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.