暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Cylindrical 38 mm encoder with metal shell and 2 m cable

myVolts

myVolts E6B2-CWZ6C incremental encoder 38 mm 2 m cable power supply

SKU CH-2CFS-16KGX MPN E6B2-CWZ6C

Incremental encoder with 38 mm diameter, 2 m cable and DC 5–26 V supply, offering optional resolutions from 100 to 5000 P/R and built-in short-circuit plus reverse-polarity protection

  • TypeAT
  • High reliability from internal ASIC devices
  • Strong anti-interference performance ensures stable signals
  • 38 mm diameter suits compact installations
  • 2 m cable simplifies wiring runs
  • DC 5 to 26 V input fits varied power supplies

38 mm Incremental Encoder

The myVolts E6B2-CWZ6C is a 38 mm diameter incremental encoder built for industrial position feedback. It operates on DC 5 V to 26 V open-collector supply and provides A, B and Z phase outputs. A two metre cable and stainless steel spindle simplify mounting in tight machine frames.

Ideal for Motion Control Integrators

Engineers who need a compact, metal-housed encoder with short-circuit and reverse-wiring protection will find this unit straightforward to install. Buyers requiring absolute position data or hollow-shaft mounting should consider alternative encoder types.

Resolution Options Up to 5000 PPR

The encoder offers selectable resolutions from 100 to 5000 pulses per revolution, including 600, 1024 and 2500 PPR. Choosing the correct pulse count matches the controller’s counting capability and determines the smallest measurable angular step.

特長

  • High reliability from internal ASIC devices
  • Strong anti-interference performance ensures stable signals
  • 38 mm diameter suits compact installations
  • 2 m cable simplifies wiring runs
  • DC 5 to 26 V input fits varied power supplies

仕様

TypeAT

この商品に関する質問

How much heat or noise does the E6B2-CWZ6C generate during continuous operation?

The encoder has no fan or active cooling; its all-metal shell and ASIC design run silently, and the 5–26 V supply keeps power draw low enough that temperature rise is minimal in typical panel-mount use.

What power source and wiring must I already have to run this encoder?

You need a DC supply between 5 V and 26 V and a way to connect the 2 m cable — brown to positive, blue to ground, black for the signal channels — plus a controller that accepts A, B and Z phase outputs.

Will the 38 mm body and 6 mm shaft fit the older motor mounts and couplings I already use?

The encoder measures 38 mm in outer diameter with a 6 mm thrust shaft and tolerates 30 N radial and 20 N axial loads, dimensions common to many standard 38 mm mounting flanges.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。