EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
myVolts
Fanless 200 W ATX module converts 16–24 V DC to standard PC rails with over-voltage and short-circuit protection
The myVolts LD-200W is a fanless DC-to-DC module that converts a 16–24VDC source into standard ATX rails for compact motherboards. It suits builders who need a completely silent power solution inside space-constrained chassis.
With no moving parts the unit runs 100% silent while delivering up to 200W continuous power. Typical draw is 12A at 19VDC and efficiency reaches 85% or more. Over-voltage protection trips at 1.5× rated output and short-circuit protection shuts the rails down instantly.
The package includes a 24-pin ATX to 12V AUX adapter, a 4-pin CPU power lead and a 4-pin floppy drive connector so the module plugs straight into a mini-ITX board. No extra cables or configuration are required.
| Type | AT |
|---|
Plug the 24-pin ATX connector into the motherboard main power socket, then attach the separate 12 V AUX lead to the CPU 4-pin header; both cables are included in the box.
With no moving parts, only occasional dust removal from the 155 × 35 × 20 mm PCB is required; the high-quality capacitors are rated for long life.
The 85 % or higher efficiency figure is specified at 19 VDC input.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?