暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact white ABS DIN-rail power supply 40W 12V 3.33A

myVolts

myVolts MDR-40-12 40W 12V 3.33A DIN rail power supply

SKU CH-32KR-7H7ET

DIN-rail switching supply delivers 12 V at 3.33 A from 100-240 VAC input with short-circuit, overload, over-voltage and over-temperature protection

  • TypeAT
  • Universal 100-240VAC input works worldwide
  • 12V 3.33A single output delivers stable 40W power
  • Multi-protection guards against short circuit overload overvoltage overheat
  • ABS housing resists impact scratches and meets UL CUL TUV CB CE
  • Mounts on TS35 DIN rail 7.5mm or 15mm profile

Industrial DIN-rail power supply

The myVolts MDR-40-12 is a 40W single-output switching supply that delivers 12V at 3.33A from a 100-240VAC input. It mounts on ultra-thin TS35/7.5 or 15 DIN rails and is housed in ABS material for impact and scratch resistance. The unit suits control panels, automation cabinets and similar industrial installations.

Replaces bulkier linear units

This supply upgrades from larger linear transformers where cabinet space is limited and universal AC input is required. The jump is worth it when a compact, protected DC source must fit on a standard 35mm rail without forced-air cooling.

40W continuous headroom

The 12V 3.33A output comfortably runs PLCs, sensors, relays and small HMIs within its rated 40W. It runs out when the load approaches the 3.33A limit or when inrush currents exceed the built-in overload protection threshold.

特長

  • Universal 100-240VAC input works worldwide
  • 12V 3.33A single output delivers stable 40W power
  • Multi-protection guards against short circuit overload overvoltage overheat
  • ABS housing resists impact scratches and meets UL CUL TUV CB CE
  • Mounts on TS35 DIN rail 7.5mm or 15mm profile

仕様

TypeAT

この商品に関する質問

Will the MDR-40-12 clip onto a TS35 DIN rail with a 7.5 mm or 15 mm profile?

Yes, the unit is designed for ultra-thin industrial-grade DIN rail TS35/7.5 or 15 and snaps on without tools.

What is the correct wiring sequence when connecting the 100-240 VAC input to the MDR-40-12?

Connect live, neutral and earth to the marked input terminals before switching on; reversing live and neutral is the most common error.

How often should the internal cooling airflow around the ABS housing be checked on the MDR-40-12?

Inspect the ventilation gaps every six months and clear any dust build-up to maintain the overheat protection margin.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。