暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green and black rectangular breakout board with ten 6-pin ports

myVolts

myVolts Power Supply Breakout Board Adapter 10 x 6pin Ports

SKU CH-F5K3-GMKVK

This power-supply breakout board splits a single AT unit into ten 6-pin connectors for multi-GPU rigs

  • TypeAT
  • Splits one AT PSU into ten 6-pin VGA connectors
  • Delivers 12 V power through copper conductors for stable mining loads
  • Compact 9 × 4.3 × 3 cm green-and-black board fits tight rigs
  • Durable copper construction handles continuous high-current operation

Mining Rig Power Distribution

This breakout board adapter provides ten 6-pin ports to split a single power supply for GPU mining rigs. It connects HP and compatible PSU outputs to multiple VGA cables using copper conductors rated for 12v operation. The compact green and black board measures approximately 3.54 by 1.69 by 1.18 inches.

Expanding Single PSU Capacity

Builders adding more graphics cards than their power supply's native connectors allow will find this adapter necessary. It replaces the need for a second power supply unit when the existing unit has sufficient wattage but insufficient 6-pin leads. The jump is worth it only when the PSU can safely deliver the total combined load.

特長

  • Splits one AT PSU into ten 6-pin VGA connectors
  • Delivers 12 V power through copper conductors for stable mining loads
  • Compact 9 × 4.3 × 3 cm green-and-black board fits tight rigs
  • Durable copper construction handles continuous high-current operation

仕様

TypeAT

この商品に関する質問

Will this breakout board fit inside a standard mining chassis measuring 10 cm depth?

The board measures 9 cm long by 4.3 cm wide and 3 cm high, so it fits within a 10 cm deep bay with clearance.

How do I connect the AT-type power supply to the ten 6-pin ports without shorting the sense wire?

Plug the AT supply's main connector into the board's input header, then attach each GPU cable to a 6-pin port; the board routes 12 V directly, so no sense-wire jumper is needed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。