暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 2Rx4 RDIMM memory upgrade for Supermicro H14DST-FL

SKU CH-EHJD-CC6PG

1.1 TB registered ECC DDR5 kit with twelve 96 GB modules running at 5600 MT/s CL46 for Supermicro H14DST-FL

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB total capacity from twelve 96GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects errors and supports full population
  • 10V operation at 2Rx4 rank matches controller expectations
  • Verified fit for Supermicro H14DST-FL motherboard

Exact-match server kit

This 1.1 TB kit contains twelve 96 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10 V operation. It is built for administrators upgrading a Supermicro H14DST-FL motherboard that requires registered ECC modules in a 288-pin form factor.

Sustained-load behaviour

Registered architecture buffers each command so the memory controller remains stable when all twelve slots are populated at full capacity. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs or virtualization workloads.

Build and connectivity

Modules use major OEM Samsung, Micron or Hynix chips without heat spreaders, relying on server chassis airflow for cooling. The 2Rx4 organization matches the board's population rules, and the 288-pin RDIMM keying ensures only compatible slots accept the kit.

特長

  • 1TB total capacity from twelve 96GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects errors and supports full population
  • 10V operation at 2Rx4 rank matches controller expectations
  • Verified fit for Supermicro H14DST-FL motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much power do these 1.10 V DDR5 5600 RDIMMs draw when the Supermicro H14DST-FL runs fully populated all day?

Each module operates at 1.10 V DDR5 standard voltage; registered buffering reduces electrical load on the memory controller, helping keep system power draw stable across all 12 slots during continuous operation.

What motherboard and CPU combination must I already have for this 12 x 96 GB kit to be recognised at full 1.1 TB capacity?

The kit is validated for the Supermicro H14DST-FL motherboard; a compatible CPU that supports 12-channel DDR5 5600 Registered ECC memory is required to address the full 1.1 TB across all 288-pin slots.

Will these CL46 2Rx4 RDIMMs run at DDR5 5600 alongside older DDR5 modules I might keep in the same system?

Mixing ranks, latencies or voltages can force the memory controller to down-clock all channels; for guaranteed DDR5 5600 CL46 operation the board should be fully populated with identical 2Rx4 1.10 V modules.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。