暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twelve green DDR5 RDIMM modules in a row, bare chips, no heat spreaders

NEMIX RAM

NEMIX RAM 1.1TB 12x96GB DDR5 5600 CL46 ECC RDIMM Supermicro H14DSH

SKU CH-M0JZ-8JJGK

12-module 1.1 TB DDR5 5600 ECC RDIMM kit with CL46 timing and 1.10 V registered operation for Supermicro H14DSH

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

他に 30点の構成を表示
  • 1 TB total capacity from twelve 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 2Rx4 organisation at 1.10 V matches the memory controller exactly
  • Verified fit for Supermicro H14DSH with 288-pin RDIMM form factor

Server Memory Kit for Supermicro H14DSH

This 1.1TB kit contains twelve 96GB DDR5 5600 RDIMM modules built for the Supermicro H14DSH motherboard. The registered ECC design matches the board's required 288-pin form factor and 2Rx4 rank structure. It is intended for administrators expanding memory capacity in compatible Supermicro servers.

DDR5 5600 Registered ECC Limits

Registered buffering allows full population of all slots at the rated 5600 MT/s speed while ECC corrects single-bit errors during operation. The 1.10V operating voltage and CL46 latency are fixed by the DDR5 5600 standard this kit follows. Modules without registered buffering or ECC will not function in this server platform.

2Rx4 Rank and 1.10V Voltage Decide Fit

The memory controller expects exactly 2Rx4 organization and 1.10V operation across all twelve slots. A different rank count or voltage will prevent the system from recognising the full 1.1TB capacity or running at 5600 MT/s. Verify the motherboard manual for approved population order before installation.

特長

  • 1 TB total capacity from twelve 96 GB modules
  • DDR5 5600 speed with CL46 latency for rated throughput
  • Registered ECC architecture corrects single-bit errors on the fly
  • 2Rx4 organisation at 1.10 V matches the memory controller exactly
  • Verified fit for Supermicro H14DSH with 288-pin RDIMM form factor

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I buy the 1.1 TB kit with twelve 96 GB modules or a smaller capacity for my Supermicro H14DSH?

The twelve-module 1.1 TB kit fills every slot on the H14DSH, letting the registered ECC design run all channels at the rated DDR5 5600 speed without population gaps.

What does the DDR5 5600 CL46 rating deliver inside a running server?

At DDR5 5600 the modules transfer data at the PC5-44800 rate, while CL46 sets the latency the memory controller expects for stable full-capacity operation.

How does the 288-pin registered ECC interface limit real-world use?

The 288-pin RDIMM form factor only fits server boards that accept registered ECC DIMMs; it cannot be used in desktop UDIMM or laptop SODIMM slots.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。