暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Compatible memory upgrade

SKU CH-7SZ6-QAKMD

128 GB DDR5 4800 ECC registered server kit in two 64 GB modules at CL40 and 1.1 V for SuperMicro X13SEW boards

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB capacity across two 64 GB modules for high-density server workloads
  • DDR5 4800 speed with PC5-38400 bandwidth handles intensive data throughput
  • ECC registered design detects and corrects errors to protect critical data integrity
  • 1 V operation reduces power draw in dense memory configurations
  • Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards ensuring drop-in compatibility

System-specific DDR5 ECC RDIMM kit

This 128GB kit contains two 64GB registered DIMMs built for SuperMicro server and workstation platforms. It targets administrators who need validated ECC memory for mission-critical workloads on compatible X13SEW motherboards.

DDR5 4800 CL40 registered specification

The modules run at 4800 MT/s with CAS latency 40 at 1.1V using a 2Rx4 organisation. ECC and registered buffering are mandatory for the supported platforms, so this exact combination decides whether the kit will post and operate without errors.

Straightforward DIMM installation

Installation follows the standard 288-pin DDR5 keyed slot procedure and usually takes minutes. The most common issue is mixing registered ECC RDIMMs with unbuffered or non-ECC modules, which prevents the system from booting.

特長

  • 128 GB capacity across two 64 GB modules for high-density server workloads
  • DDR5 4800 speed with PC5-38400 bandwidth handles intensive data throughput
  • ECC registered design detects and corrects errors to protect critical data integrity
  • 1 V operation reduces power draw in dense memory configurations
  • Validated for SuperMicro X13SEW-TF and X13SEW-F motherboards ensuring drop-in compatibility

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

この商品に関する質問

What does the 4800 MT/s rating deliver once the kit is installed in a SuperMicro X13SEW board?

The modules run at DDR5 4800 (PC5-38400) with CL40 latency, providing 128 GB of registered ECC capacity across two 64 GB DIMMs at the standard 1.1 V.

How does the registered DDR5 interface affect usable bandwidth on this platform?

As registered DDR5 RDIMMs the kit presents a 2Rx4 organisation that the memory controller addresses directly; the DDR5 4800 interface caps theoretical throughput at the PC5-38400 data rate.

What physical clearance does the 288-pin RDIMM need inside a 1U or 2U server chassis?

Each stick is a standard 288-pin DDR5 RDIMM without a heat spreader, so it fits the regular DIMM slot height and keying defined for the X13SEW-TF and X13SEW-F motherboards.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。