暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 128GB DDR5 5600MHz ECC Registered RDIMM 2Rx4 CL46 1.1V 288-Pin Supermicro H14DST-F memory upgrade

SKU CH-BF6N-TTV38

128 GB DDR5 5600 MHz ECC registered RDIMM, 2Rx4 CL46 1.1 V, validated for Supermicro H14DST-F motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

他に 30点の構成を表示
  • 128 GB capacity lets the Supermicro H14DST-F run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 MT/s (PC5-44800) with CL46 timing matches the board's exact specification
  • 1 V operation at 2Rx4 rank density keeps power draw low while maximising density
  • 288-pin RDIMM form factor fits the server slots the H14DST-F requires

128GB DDR5 RDIMM for Supermicro H14DST-F

This 128GB DDR5 5600MHz ECC Registered RDIMM is built for the Supermicro H14DST-F motherboard. It delivers 2Rx4 rank organisation at 1.1V with CL46 timing so the memory controller recognises the full capacity immediately. The 288-pin form factor matches the board's DIMM slots exactly. Server administrators upgrading production systems get the precise module specification the platform expects.

Registered ECC limits for DDR5 5600

Registered buffering offloads the memory controller, allowing every slot to run fully populated at the rated 5600MHz speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. The DDR5 standard at this frequency requires the registered architecture for stable operation across all populated channels. Builders using unbuffered UDIMMs or SODIMMs will find they do not fit or function in this server platform.

288-pin RDIMM build and daily handling

The module uses major OEM Samsung, Micron or Hynix chips without a heat spreader, keeping the profile low for dense server chassis airflow. The 288-pin Registered edge connector keys only into DDR5 RDIMM slots, preventing accidental insertion into incompatible sockets. Installation follows the motherboard manual's population order to ensure full capacity recognition. Buyers needing consumer desktop memory or non-ECC modules cannot use this part in those systems.

特長

  • 128 GB capacity lets the Supermicro H14DST-F run fully populated at rated speed
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • DDR5 5600 MT/s (PC5-44800) with CL46 timing matches the board's exact specification
  • 1 V operation at 2Rx4 rank density keeps power draw low while maximising density
  • 288-pin RDIMM form factor fits the server slots the H14DST-F requires

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 128GB DDR5-5600 2Rx4 RDIMM or a different capacity for my Supermicro H14DST-F?

This module provides exactly 128GB in a single 288-pin RDIMM at 5600MHz with CL46 timing and 1.10V. Your motherboard manual lists the approved population order and maximum capacity per slot, so check that first to confirm this density fits your planned configuration.

Will this DDR5-5600 CL46 kit actually run at 5600MHz once installed in the H14DST-F?

The module is specced for DDR5 5600 (PC5-44800) with CL46 at 1.10V. The Supermicro H14DST-F memory controller negotiates speed at boot; with the correct population order it will recognise the 2Rx4 rank structure and operate at the rated 5600MHz.

Is the 288-pin RDIMM interface on this kit the same as a standard UDIMM, and does it limit how many modules I can populate?

No, this is a 288-pin Registered (RDIMM) DDR5 module, not a UDIMM. The registered buffer reduces electrical load on the memory controller, allowing the H14DST-F to run every supported slot fully populated at the rated 5600MHz without signal degradation.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。