暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V CL46 288-PIN ECC Registered RDIMM H14DSG-O-CPU memory upgrade

SKU CH-G8ME-PSG2C

128GB DDR5 5600MHz registered ECC RDIMM validated for Supermicro H14DSG-O-CPU motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB capacity lets the Supermicro H14DSG-O-CPU run fully populated at rated speed
  • DDR5-5600 (PC5-44800) CL46 timing matches the board's memory controller expectations exactly
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank keeps power draw within the platform's design limits
  • 288-pin DDR5 RDIMM form factor fits the required Supermicro server slots precisely

Purpose-built server upgrade

This NEMIX RAM module delivers 128GB of DDR5 5600 registered ECC memory in a 288-pin RDIMM form factor. It operates at 1.1V with CL46 latency and a 2Rx4 rank structure, matching the exact electrical and timing requirements of the target platform. The kit is validated for the Supermicro H14DSG-O-CPU motherboard.

Suited for single-slot capacity needs

System administrators expanding a Supermicro H14DSG-O-CPU server with a single high-density DIMM will find this module fits the board's registered memory architecture. Builders requiring unbuffered UDIMMs, SODIMMs, or non-ECC memory for workstation or consumer platforms cannot use this part.

Registered ECC architecture decides fit

The 288-pin RDIMM registered buffer and on-die ECC are mandatory for the Supermicro H14DSG-O-CPU memory controller. A UDIMM or non-ECC module will not be recognised, so this specification is the sole determinant of compatibility.

特長

  • 128 GB capacity lets the Supermicro H14DSG-O-CPU run fully populated at rated speed
  • DDR5-5600 (PC5-44800) CL46 timing matches the board's memory controller expectations exactly
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation at 2Rx4 rank keeps power draw within the platform's design limits
  • 288-pin DDR5 RDIMM form factor fits the required Supermicro server slots precisely

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the package include anything besides the 128GB DDR5 5600MHz CL46 RDIMM module?

The box contains a single 128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V CL46 288-pin ECC Registered RDIMM. No cables, brackets, heat spreaders or additional components are included.

Should I choose the 2Rx4 registered ECC version or would a UDIMM work in the Supermicro H14DSG-O-CPU?

The Supermicro H14DSG-O-CPU motherboard requires 288-pin Registered (RDIMM) modules. A UDIMM or SODIMM will not fit or function; the 2Rx4 registered ECC configuration matches the board's memory-population rules.

Will the CL46 timing and 1.1V voltage run automatically at 5600MHz once installed in the H14DSG-O-CPU?

Yes. The module's exact rank, voltage and timing match what the server's memory controller expects, so it is recognised at full capacity and operates at its rated DDR5 5600 speed without manual configuration.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。