暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 RDIMM sticks, no heat spreader, gold contacts, 288 pins

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 ECC RDIMM CL22 1.2V 288-pin memory upgrade

SKU CH-5333-X9K0W

Registered DDR4 ECC server memory kit, 16 GB in two 8 GB modules at 3200 MT/s CL22 1.2 V for ASRock Rack ROMED8-2T EPYC boards

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 16GB 2X8GB

他に 4点の構成を表示
  • ECC protection maintains data integrity for critical workloads
  • Registered DDR4 3200 speed delivers stable server performance
  • 2V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits ASRock EPYC motherboards
  • Dual-rank 1Rx8 organisation maximises capacity per channel

ECC RDIMM kit for EPYC servers

This NEMIX RAM kit provides 16 GB of DDR4 3200 registered ECC memory in a matched pair of 8 GB modules. It targets administrators who need validated stability on ASRock Rack ROMED8-2T motherboards running AMD EPYC processors. The modules operate at 1.2 V with CL22 latency and use major OEM DRAM from Samsung, Micron or Hynix.

Upgrade from non-ECC or slower RDIMMs

Replacing unbuffered consumer DIMMs or lower-speed registered modules eliminates data-corruption risk and matches the platform’s qualified memory list. The jump is worth it when workloads demand error correction and the motherboard requires registered DIMMs to populate all slots at rated speed.

Fits ASRock Rack ROMED8-2T DDR4 slots

Each 288-pin RDIMM installs directly into the server board’s memory channels without heat spreaders that could interfere with tight heatsink clearance. The 1Rx8 organisation leaves additional ranks available per channel for future capacity expansion while keeping the memory controller within its supported load limits.

特長

  • ECC protection maintains data integrity for critical workloads
  • Registered DDR4 3200 speed delivers stable server performance
  • 2V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits ASRock EPYC motherboards
  • Dual-rank 1Rx8 organisation maximises capacity per channel

仕様

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will these 288-pin DDR4 RDIMMs fit the DIMM slots on my ASRock Rack ROMED8-2T motherboard?

Yes, the 288-pin RDIMM form factor matches the DDR4 slots on the ASRock Rack ROMED8-2T, and the kit is validated for that board.

Do I need to populate specific slots or follow a channel order when installing this 2x8GB kit?

Install one module per memory channel, typically using the same-coloured slots first; consult the ROMED8-2T manual for the exact population sequence.

Are the Samsung, Micron or Hynix ICs on these modules user-serviceable or replaceable later?

No, the DRAM chips are soldered to the PCB; if a module fails you replace the entire DIMM rather than individual components.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。