暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green SODIMM modules side by side, 262-pin DDR5, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR5 4800 SODIMM memory upgrade for SuperMicro SYS-E100-13AD-E

SKU CH-KGY2-33V8W

A 16 GB DDR5 SODIMM kit running at 4800 MT/s with CL40 latency for the SuperMicro SYS-E100-13AD-E

  • Capacity16GB (2 x 8GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s transfers data at PC5-38400 bandwidth
  • CL40 latency keeps response tight under load
  • 10 V operation reduces platform power draw
  • 262-pin SODIMM form factor fits SuperMicro SYS-E100-13AD-E slot exactly

Capacity and Form Factor

This NEMIX RAM kit supplies 16 GB across two 8 GB SODIMM modules built to the 262-pin DDR5 standard. It is designed for the SuperMicro SYS-E100-13AD-E and related CSE-E101-04 platforms that require PC5-38400 speed at 1.10 V.

ECC and Buffering Limits

The modules are non-ECC and unbuffered, so they suit systems that accept standard SODIMM memory without error correction or registered signalling. Buyers who need ECC protection or registered DIMMs for their server board should look at a different part.

Speed Rating

The kit runs at DDR5 4800 with CAS latency CL40, matching the PC5-38400 specification listed for the target SuperMicro systems. Verify that your platform supports this exact data rate before purchase.

特長

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR5 4800 MT/s transfers data at PC5-38400 bandwidth
  • CL40 latency keeps response tight under load
  • 10 V operation reduces platform power draw
  • 262-pin SODIMM form factor fits SuperMicro SYS-E100-13AD-E slot exactly

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K2
Capacity16GB (2 x 8GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR5 4800MHZ PC5-38400 1Rx6 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

この商品に関する質問

Does the 1.10 V DDR5 4800 kit run hotter or louder than standard DDR5 SODIMMs in a SuperMicro SYS-E100-13AD-E?

The modules operate at 1.10 V without a heat spreader, matching the standard DDR5 SODIMM voltage, so thermal output is comparable to other 4800 MT/s kits in the same chassis.

What must the SuperMicro SYS-E100-13AD-E already have to accept this 262-pin DDR5 SODIMM kit?

The board needs two free DDR5 SODIMM slots that support 1Rx8 unbuffered non-ECC memory at 4800 MT/s and 1.10 V.

Will the CL40 4800 MT/s modules down-clock reliably alongside older DDR5 SODIMMs the buyer may keep?

Yes, the kit is rated CL40 at 4800 MT/s; the memory controller will negotiate a common speed and latency with any compatible DDR5 SODIMMs already installed.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。