暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 SODIMM POSIFLEX XT-6315E memory upgrade

SKU CH-P3CS-BVC5R

16 GB DDR4 2400 CL17 SODIMM module built for POSIFLEX XT-6315E terminals

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB capacity expands POS terminal memory for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX XT-6315E specifications exactly
  • CL17 latency ensures responsive operation under load
  • 2V low voltage reduces power draw in fanless systems
  • 260-pin SODIMM form factor fits the terminal slot directly

NEMIX RAM 16GB DDR4 2400 SODIMM for POSIFLEX

This 16GB DDR4 2400 SODIMM is built to upgrade the POSIFLEX XT-6315E JIVA High-End Fanless POS Terminal. It delivers 16GB of non-ECC unbuffered memory at 1.20V with CL17 latency in a 260-pin form factor. The module uses major OEM chips from Samsung, Micron or Hynix and carries the part number MS19200-628K1.

Who this suits and who should look elsewhere

This module suits technicians maintaining the POSIFLEX XT-6315E terminal who need a direct 16GB replacement or capacity increase. It is not for systems that require ECC registered memory or a different pin count. Buyers needing capacities other than 16GB or speeds other than DDR4 2400 should look elsewhere.

The specification that decides fit

The decisive specification is the 260-pin DDR4 SODIMM interface combined with non-ECC unbuffered operation at DDR4 2400 CL17 1.20V. The terminal must accept a 2Rx8 16GB module with this exact electrical and physical profile.

特長

  • 16GB capacity expands POS terminal memory for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX XT-6315E specifications exactly
  • CL17 latency ensures responsive operation under load
  • 2V low voltage reduces power draw in fanless systems
  • 260-pin SODIMM form factor fits the terminal slot directly

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Does the 260-pin SODIMM fit the POSIFLEX XT-6315E memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX XT-6315E JIVA fanless POS terminal.

What is the correct orientation for inserting the CL17 1.2 V module?

Align the notch on the gold edge with the key in the slot, press firmly until the side clips click, and verify the system reports 16 GB at 2400 MT/s.

Will the non-ECC unbuffered DDR4 need any firmware updates or periodic replacement?

No firmware updates are required; the memory is a solid-state component with no moving parts and carries a lifetime replacement warranty from the manufacturer.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。