我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 2400 CL17 SODIMM POSIFLEX XT-6315E memory upgrade

SKU CH-P3CS-BVC5R

16 GB DDR4 2400 CL17 SODIMM module built for POSIFLEX XT-6315E terminals

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB capacity expands POS terminal memory for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX XT-6315E specifications exactly
  • CL17 latency ensures responsive operation under load
  • 2V low voltage reduces power draw in fanless systems
  • 260-pin SODIMM form factor fits the terminal slot directly

NEMIX RAM 16GB DDR4 2400 SODIMM for POSIFLEX

This 16GB DDR4 2400 SODIMM is built to upgrade the POSIFLEX XT-6315E JIVA High-End Fanless POS Terminal. It delivers 16GB of non-ECC unbuffered memory at 1.20V with CL17 latency in a 260-pin form factor. The module uses major OEM chips from Samsung, Micron or Hynix and carries the part number MS19200-628K1.

Who this suits and who should look elsewhere

This module suits technicians maintaining the POSIFLEX XT-6315E terminal who need a direct 16GB replacement or capacity increase. It is not for systems that require ECC registered memory or a different pin count. Buyers needing capacities other than 16GB or speeds other than DDR4 2400 should look elsewhere.

The specification that decides fit

The decisive specification is the 260-pin DDR4 SODIMM interface combined with non-ECC unbuffered operation at DDR4 2400 CL17 1.20V. The terminal must accept a 2Rx8 16GB module with this exact electrical and physical profile.

商品特色

  • 16GB capacity expands POS terminal memory for smoother multitasking
  • DDR4 2400 speed matches POSIFLEX XT-6315E specifications exactly
  • CL17 latency ensures responsive operation under load
  • 2V low voltage reduces power draw in fanless systems
  • 260-pin SODIMM form factor fits the terminal slot directly

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K1
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Does the 260-pin SODIMM fit the POSIFLEX XT-6315E memory slot?

Yes, the module is a 260-pin DDR4 SODIMM built for the POSIFLEX XT-6315E JIVA fanless POS terminal.

What is the correct orientation for inserting the CL17 1.2 V module?

Align the notch on the gold edge with the key in the slot, press firmly until the side clips click, and verify the system reports 16 GB at 2400 MT/s.

Will the non-ECC unbuffered DDR4 need any firmware updates or periodic replacement?

No firmware updates are required; the memory is a solid-state component with no moving parts and carries a lifetime replacement warranty from the manufacturer.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。